Color: white glue stick hot melt

 Hot melt adhesive type : Packing hot melt adhesive

Category of resin adhesive : thermoplastic adhesive

Bonding material type: Glass, electronics, leather, plastic, rubber, fiber, stone, metal, wood, other materials, cement products, ceramic, medical, the paper to class .

Working temperature: 175 °C

Effective substance p: 99.99 (%)

Environmental protection type hot melt adhesive rod, can be used for non-woven fabric, handicrafts, Christmas gifts, paper products, packaging, metal and so on. This product is a natural white hot melt glue stick (strip and granular), no toxicity, high viscosity, fast curing, easy operation, continuous use without carbonization phenomenon. And through the CTI certification of environmental protection.

Model No.:

Appearance: white bar

Softening point: 85 °C ± 5

Viscosity: 1500 ± 500CPS/160 °C

Specification: 7.2mm * 300mm 11.2mm * 300mm

Method of operation:

Glue stick before use please glue gun preheating 3-5 minutes.

Please keep the strip surface clean to prevent impurities block the gun nozzle.

Glue gun when not in use, please stand on the desktop, do not fall flat, otherwise it will cause the collapse of gum phenomenon, resulting from the glue gun burnt out and glue strip coarsening stuck glue gun entrance, not glue.

Glue glue gun is not used up, please try not to strip from the glue gun aside.

If the reverse flow of glue glue gun, please immediately stop using, to be clean finished before use.

Glue gun heated continuously for more than 15 minutes don't, please cut off the power supply.

The recommended temperature: 140 ~ 165 °C

packaging: 25 kg carton packaging

transport: non dangerous goods, according to the transport general chemical products.

storage conditions: ventilation, dry, cool place

equipment cleaning method: to equipment manufacturer cleaning equipment, or with mineral oil or paraffin cleaning equipment in 160 °C, then rinse with hot melt adhesive, glue temperature should not exceed 180 °C.

Note:

1, the use of places should be good ventilation, away from the fire.

2, avoid the melted material contact with eyes, skin.

3, if the molten material into contact with the skin, immediately the injured skin immersed in water cooling, hospitalized.