Specifications

1.Electroplated diamond blade
2. Fast cutting and clean cutting
3.Popular Items in North America Market
4. diamond abrasive

1.  4.5" EP Diamond Flush cutting blades, Turbo protections

2.This professional quality blade is designed for flush cutting and removal of excess materials after cutting  of Marble and Similar Materials. Fits angle grinders with adapter : M14 or 5/8-11 thread

 Electroplating Technology keeps all diamond particles attached to segment plate,  making this product a Chip-Free cutting item.

3. High exposure rate of diamond on the core of diamond blade to achieve fast cutting speed

4. Diamond grit: D427 or D301

5. Dry cutting is used in small cutting job, Wet cutting is recommended for long working life.

Notice for safe cutting
Dry Cutting Blades
Do’s

Follow manufacturer’s blade recommendation for material being cut. Check for suitability of cutting dry. Inspect diamond blade for damage before mounting on saw. Check arbor shaft and flanges for damage or uneven wear. Be sure blade is mounted on correct diameter shaft with arrow in the proper direction of rotation and blade shaft nut is securely tightened with wrench. Inspect blade periodically during use for fatigue cracks and segment damage. Wear proper safety equipment and observe safe operation procedures.
Don’ts

Never operate and saw without safety guards in place. Do not exceed maximum operating speed established for blade diameter. Do not force blade into material: allow blade to cut at it’s own speed. Do not cut or grind with side of blade or cut a curve or radius.
Wet Cutting Blades
Do’s

Match blade specification with material to be cut. Inspect blade for damage before mounting on saw: check arbor shaft and flanges for damage and uneven wear. Be sure blade is mounted on correct diameter shaft and the blade shaft nut is securely tightened with wrench. Check for continuous flow of water to both sides of the blade. Follow manufacturer’s recommended pulley sizes and operating speeds for specific diameter blades.
Don’ts

Do not operate any machine without blade guard in place. Do not cut dry with blades recommended for wet cutting. Do not exceed maximum safe operating speed. Do not operate saw with blade diameter larger than machine’s capacity.
Always follow all the manufacturer’s safety recommendations as well as complying with the ANSI B7.1, B7.5, OSHA and Safety Guidelines furnished with each product. Using blades machines in a SAFE manner will assure the long life and cutting quality of your Diamond Blades.