- APT-300CPE5.8 is 300Mbps high power 500mw outdoor wireless CPE/AP with omni antennas buitl-in.It Complies with IEEE802.11a/n standard,adopt AR9344 chipset,8MB flash,64MB DDR2 RAM.
14dBi high gain antenna,500mW high power,more than 3000meters wifi range,good choice for outdoor wifi signal coverage.
- Gateway,AP and WiFi Repeater operation modes,it can transmit wifi signal in a wide area for outdoor users,or can bridge the exist wifi signal to extend the range.
- APT-300CPE5.8 with ABS waterproof,dustproof and sunscreen shell,temperature adaptive and board protective charactors,suit for outdoor wifi coverage projects.Meantime,it supports Power over Ethernet,passive PoE/IEEE 802.3af PoE,so it's easy to setup even no power socket nearby.With LED light indicates signal strength, which is easy to find a suitable place for outdoor CPE.
- APT-300CPE5.8 supports multi 4 SSID,each SSID comply with IEEE802.1Q VLAN,when works with our AC controller,easy to be configured and setup centrally,and it supports Portal captive,which is easy to add promotion ads for users.
| hardware | |
| Chipset | AR9344 |
| Wireless | 802.11A/N, 2T2R 300M MIMO Technology |
| Memory | 64MB DDR2 RAM |
| Flash | 8MB(16MB max) |
| Interface | 2 10/100 Mbps RJ45 Port, support 24v/48V PoE |
| 1 Reset Button | |
| 1 DC Jack, 12V Power Supply | |
| Antenna | 14dbi Antenna |
| LED Light | POWER WIFI WAN LAN S1(GPIO9) S2(GPIO14) S3(GPIO11) S4(GPIO12) |
| Size | L:257mm,W:87mm,H:38mm |
| Power | DC12V1A/POE 24V(48v optional);100V/240V |
| RF Data | |
| RF Data | 802.11a/n |
| 5.8GHz | |
| Korea,Japan,ETSI,FCC | |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK | |
| Data Rate | 300 Mbps |
| Firmware | |
| Operation Mode | Gateway/AP/WiFi Repeater |
| Protocol/Standard | IEEE 802.3(Ethernet) |
| IEEE 802.3u(Fast Ethernet) | |
| IEEE 802.11N(2.4G WLAN) | |
| Wireless | Auto-Channel selection |
| Distance Control (802.1x Ack timeout) | |
| Multiple SSID (4 SSID) | |
| BSSID | |
| Security | WEP Encryption-64/128/152 bit |
| WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | |
| WPA/WPA2 Enterprise (WPA-EAP using TKIP) | |
| Hide SSID | |
| System Setting | Web-based configuration (HTTP/Telnet) |
| Firmware upgrade | Upgrade firmware via web browser or TFTP |
| Administration | Admin Password can be configured |
| System monitoring | Status in hand,useful statistic and Event log |
| Log | Supports local logs,logs host,logs file export |
| Reset | Reset or factory defaults |
| Backup | Restore settings & configuration of the device to local file |
| Physical Property | |
| Temperature | Working:0°C~55°C |
| Humidity | Storage:-20°C to 70°C |
| 5%~95% (typical) | |
| Package | |
| CPE unit*1 | |
| PoE Adapter*1 | |
| User Manual*1 | |
LAN Cable*1 | |
Stainless steel ring*2 | |
Shipping by EMS/FedEx/DHL/UPS/TNT/Air/Sea etc.
20pcs/ctn,kraft paper box or OEM package.
•All products have been checked and packaged in good condition before dispatching.
•All products have 2 years warranty.
•Provide OEM/ODM service.
Shenzhen APT Communication Technology Co.,Ltd.is located in Shenzhen China,establishedsince 2012.
We provide OEM/ODM manufacturing service for network equippment hardwares like Ethernet.
switch/POE switch/Splitter/Injector,WIFI access point/router/bridge/CPE,media
converter/Fiber switch etc.
We have experienced engineer team to design excellent performance hardwares at reasonable.
price and fast lead time.Our engineers used to develop H3C products.
Do you provide OEM service?
Yes, we mainly provide OEM/ODM manufacturing.
Do you provide only PCBA?
Sure,PCBA is welcome also.
Do you provide firmware support?
Yes,support.
Is there MOQ limit?
Welcome to place sample order to check the quality before bulk orders.
Also welcome to visit our factory before bulk order.
Of course,different qty with different price.
Since we mainly do OEM/ODM orders.So large qty makes the cost lower.