QCA9531 chipset Wireless 8MB flash 64MB ram Openwrt WLAN UART to WIFI Module
USD $1 - $20 /Unit
Min.Order:2000 Units
Shenzhen APT Communication Technology Co., Ltd.
11a/n dual band 600mbps Atheros AR9344 AR9382 Wifi Router AP CPE board
QCA9563+QCA9882+QCA8337 solution 11ac 1200mbps gigabit WiFi Access Point/CPE Board
Best 500MW high power 300mbps 8M flash 64M ram openwrt wifi access point
MT7620N 2.4Ghz 300Mbps Ceiling WiFi access point for KTV/Hotel/Villa/Campus/Hall/Company/Factory
Welcome to Customize all kinds of L2 ethernet switch/POE switch/POE splitter/POE injector/wifi ap/router/CPE etc!High quality reasonable price fast lead time!
Overview
APT-WM300 WLAN module was designed according to IEEE802.11 b/g/n.The throughput is up to 300Mbps.It is based on MIMO technology which can efficiently enhance wireless transmission performance:rate/stability/coverage.It supports CCA technology channel selected feature, which can avoid channel conflicted automatically.What’s more,it supports WEP/WPA/WPA2 and various wireless encryption tandards,which guarantee the network transmission security and safe.
Applications
AP WIFI
UART WIFI
Repeater WIFI
IP TV
IP DVD(Internet VOD Player)
Set Top Box
Home Gateways
Gaming Consoles
DVR
specification
Features | Spec | |
Wireless standard | 802.11b/g/n, 2.4Ghz | |
Memory | 8MB flash,64MB ram | |
Antenna interface | 1 PC I-PEX connector(can connect the external antenna) | |
Work mode | Router and bridge mode | |
Physics rate | IEEE 802.11b: 11Mbps IEEE 802.11g: 54 Mbps IEEE 802.11n: 300Mbps | |
Management mode | Support local WEB management | |
Radio | Frequency range | 2.412 ~ 2.472 GHz |
Channel | 13 channels. which can be configured to the specifications of the United States, Canada, Europe, Japan, China and other regions. | |
Modulation mode | DSSS , CCK and OFDM | |
Coding scheme | BPSK, QPSK, 16QAM and 64QAM | |
Antenna | Onboard i-pex receptacle to connect external antenna | |
RF Received Sensitivity | 802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps; -78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps 802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps; -79dBm @ 12 Mbps; -77dBm @ 18 Mbps; -74dBm @ 24 Mbps; -70dBm @ 36 Mbps; -66dBm @ 48 Mbps; -65dBm @ 54 Mbps 802.11n: -65dBm @ 72 MbpsHT20; -62dBm @ 150 MbpsHT40; | |
RF Maximum output power | 802.11b: 18 ±1dBm 802.11g: 13 ± 1dBm @ 54 Mbps; 14 ± 1dBm @ 48 Mbps; 15 ± 1dBm @ 36 Mbps; 16.5 ± 1dBm @6~24Mbps. 802.11nHT20: 12 ± 1dBm @ MCS7HT20; 13 ± 1dBm @ MCS6 HT20; 14 ± 1dBm @ MCS5 HT20; 15 ± 1dBm @ MCS4 HT20; 16± 1dBm @ MCS3 HT20; 17 ± 1dBm @ MCS2 HT20; 17 ± 1dBm @ MCS1 HT20; 17± 1dBm @ MCS0 HT20. 802.11nHT40: 12 ± 1dBm @ MCS7HT40; 13 ± 1dBm @ MCS6 HT40; 14 ± 1dBm @ MCS5 HT40; 15 ± 1dBm @ MCS4 HT40; 15.5± 1dBm@MCS3 HT40; 15.5± 1dBm @ MCS2 HT40; 15.5±1dBm @MCS1 HT40; 15.5 ± 1dBm @ MCS0 HT40. | |
Encryption mode | 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK) | |
Ethernet port function | WAN Port | 1 FE WAN interface, 10/100M auto adaptive, Full/Half duplex,support Auto-MDI/MDIX, Ethernet interface connect with mainboard by the pins in module. |
LAN Port | 2FE WAN interface, 10/100M auto adaptive, Full/Half duplex,support Auto-MDI/MDIX, Ethernet interface connect with mainboard by the pins in module. | |
I/O Function | Function Interface | 1xUART, 1x I2S, 1xUSB host/client, 1xWAN, 2xLAN |
GPIO | 18 general-purpose I / O ports (Part of the I / O ports will bemultiplexed with other interfaces) | |
Operating voltage | 3.3V | |
3.3VPeak current | 500mA | |
Operating temperature | 0°C to +40°C | |
Operation humidity | 10 ~ 90%(non-condensed) | |
Product size | 40 mm x 40 mm |
PINs definition
pin | definition | pin | definition |
2 | 5V | 1 | 5V |
4 | GND | 3 | GND |
6 | 3.3V | 5 | 3.3V |
8 | GPIO16 | 7 | GPIO17 |
10 | GPIO4 | 9 | GPIO12 |
12 | RST_B | 11 | GPIO13 |
14 | UART_TX | 13 | USB_DP |
16 | UART_RX | 15 | USB_DM |
18 | GND | 17 | GND |
20 | 2.5V | 19 | AVDD20 |
22 | GND | 21 | GND |
24 | P0_RX- | 23 | P4_TX- |
26 | P0_RX+ | 25 | P4_TX+ |
28 | P0_TX- | 27 | P4_RX- |
30 | P0_TX+ | 29 | P4_RX+ |
32 | GND | 31 | GND |
34 | GPIO2 | 33 | GPIO1 |
36 | GPIO3 | 35 | GPIO0 |
38 | GPIO11 | 37 | SPI_CLK |
40 | SPI_MOSI | 39 | SPI_MISO |
Shipping by EMS/FedEx/DHL/UPS/TNT/Air/Sea etc.
400pcs/ctn,Foam bag,kraft paper box or OEM package.
•All products have been checked and packaged in good condition before dispatching.
•All products have 2 years warranty.
•Provide OEM/ODM service.
Shenzhen APT Communication Technology Co.,Ltd.is located in Shenzhen China,establishedsince 2012.
We provide OEM/ODM manufacturing service for network equippment hardwares like Ethernet.
switch/POE switch/Splitter/Injector,WIFI access point/router/bridge/CPE,media
converter/Fiber switch etc.
We have experienced engineer team to design excellent performance hardwares at reasonable.
price and fast lead time.Our engineers used to develop H3C products.
Do you provide OEM service?
Yes, we mainly provide OEM/ODM manufacturing.
Do you provide only PCBA?
Sure,PCBA is welcome also.
Do you provide firmware support?
Yes,support.
Is there MOQ limit?
Welcome to place sample order to check the quality before bulk orders.
Also welcome to visit our factory before bulk order.
Of course,different qty with different price.
Since we mainly do OEM/ODM orders.So large qty makes the cost lower.