Product Details

Specifications

ce&rohs approval led xx tubee
1.G13 4ft 18W tube
2.PF>0.95 CRI>0.7
3.FCC&CE&RoHS Listed
4.Warranty:3Years

ce&rohs approval led xx tubee from Shenzhen SAA approved

1. LED Source: SMD 2835/ 3014

2. CRI ≥ 70 Ra

3. PFC > 0.95

4. Input Voltage: AC100-240V

5. Frequency: 50Hz / 60Hz

6. Product material : Aluminum body + PC cover

7. PCB : Aluminum substrate

8. Single line LED light SMD2835 ; Double line LED light SMD3014

9. Liifespan: > 30,000 hrs

10. Socket type :G13

No.	Model No.	Length	Power	Luminous Flux	Input Voltage	Colour Temprature
1	SL-TL-001-9W	600mm / 2ft	9W	850±100LM	AC100-240V 50/60Hz	2700K~6500K
2	SL-TL-002-12W	900mm / 3ft	12W	1120±100LM
3	SL-TL-008-18W	1200mm / 4ft	18W	1700±100LM
4	SL-TL-003-20W	1200mm / 4ft	20W	1900±100LM
5	SL-TL-003-26W	1200mm / 4ft	26W	2350±100LM
6	SL-TL-004-23W	1500mm / 5ft	23W	2150±100LM
7	SL-TL-004-28W	1500mm / 5ft	28W	2650±100LM
8	SL-TL-005-32W	1800mm / 6ft	32W	2950±100LM
9	SL-TL-011-45W	2400mm / 8ft	45W	4150±100LM
T8 Integrated LED Tube light All above T8 models can be “T8 Integrated LED Tube Light” with the same specifications. This Integrated does not need the T8 bracket. It only use the fixture for installation(accessory as the picture show).

Compared with traditional lamp

1. LED Tube Light adopt high brightness SMD3014 / SMD2835 / SMD3528 as its illuminant, with excellent optical performance.

2. High light efficiency with 50% energy saving effect than traditional fluoresecent tube light.

3. Environmental protection. no Hg,and very long life-span ( 10 times than traditional fluoresecent tube light ).

4. Can be compatible with triac dimming

5. Can be configured as Microwave sensor, Infrared sensor, Sound sensor

Application Areas

Office Building, Hotel, Shopping Mall, Subway

Railway station, Bus Station

Underground Parking, Factory, Home

Advertisement lighting and Decoration lighting and so on.

Installation:

1. Open the packaging,check whether the products have any damage.

2. Cut off the total swith.

3. If the original ballast is electronic ballast,shown as picture. 1 at the time of installation.Remove the original electronics ballast and old tube at first.

then change wiring and install this product according to picture

a. Starter

-- It is standard for American and Austrialia market with Single-ended energized

-- It is hot selling with Double-ended energized

b. Ballast

-- It is available to remove ballast from fluorescent tube

-- It is also available to retain ballast and it would be dissipation 6-7W

Package:

a)0.6M led tube 8KG/Carton

Carton size: Length 0.66M Wideth 0.22M Height 0.24M

b)1.2M led tube 15KG/Carton

Carton size: Length 1.26M Wideth 0.22M Height 0.24M