CNC 602A Injector Cleaner & Tester,cnc602 2013
USD $1 - $100 /Set
Min.Order:1 Set
Shenzhen Huawenyi Technology Co., Ltd.
Feature:
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors, to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* n-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Specification
Working conditions:
* Temperature: -10~+40C;
* Relative humidity: less than 85%;
* Intensity of outer magnetic field: less than 400A/m;
* No naked flame within 2m.
Specifications:
* Power supply: AC220V±10%, 50/60Hz; AC110V±10%, 50/60Hz.
* Main unit power: 200W;
* Ultrasonic cleaner power: 100W;
* imulated RPM range: 10 990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4000ml;
* Dimensions: 400mm×410mm×580mm;