Product Details

Specifications

* Time delay on make
* 3 minutes time delay
* 5 minutes time delay
* Knob adjustable time delay from .03-10 minutes

Time delay & time relay

Works with anticipator thermostat

* Time delay on make
* QD-100 3 minutes time delay
* QD-101 5 minutes time delay
* QD-068 Knob adjustable time delay from .03-10 minutes

Installation

1. Disconnect power.

2. Connect terminals in series with the starting device as shown in the system diagram below.

3. For 24 VAC circuits, apply control as packaged. For 120/240 VAC circuits, cut the jumper wire.

4. Select the desired time delay.

5. Reapply power, check operation.

6. Trickle current bypass resistor T1 to T3 < 1k ohm.

Specification

Input:

Line Voltage: 18-240 VAC/VDC

Line Frequency: 50/60 HZ

Output:

Output Ratings:

Maximum: 1.5 amps

Minimum: 40 mA

Inrush: 15 amps

Time Delay: .03-10 mins. adjustable

3 or 5 minute fixed

Mode of Operation

When power is applied to the input, the time delay begins. After the time delay is complete, the load energizes and remains energized as long as power is applied. The control is reset by removing power during or after the time delay period.

The QD-068 provides thermostat interruption protection, even in the presence of a trickle current.

Timing Diagram

System Diagram

For replaces