Specifications

Pipeclamps
1.ISO 9001:2008 certification
2.full range of sizes are available
3.zinc plated

For fastening:

Pipe lines to walls,cellings and floors in the sanitary and heating area.

 

Properties:

Material:	steel DD11(material no.1.0332) acc.to DIN EN 10111
Zinc plating:	electro zinc plated,6-8µm
Resistance welded nut:	M8
Resistance welded nut:	M8/10
Locking screw:	combi-slot cheese head screw
Acoustic insulation lining:	material:EPDM;chlorine-free;silicone-free
Sound insulation:	for DIN 4109
Temperature range:	-50° to +110°
Hardness:	45+-5°Shore
Fire behavior:	DIN 4102:class B2

 

Avantages:

1.It enables one-hand mounting.

2.A pipe is preassembled by mere snapping.

3.The quick-clamping system protects the clamp against uncontrollable opening after snapping.

4.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.

5.It prevents the action of electrolysis.

6.Single-screw pipe clamps with a snap lock satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.

7.One-piece hinged pipe clamp with patented rapid locking and readjusting mechanism.

8.Compact design for close installation and easy pipe insulation.

9.Locking screw with large combination recessed slot secures against loss.

10.Pipe clamp with rubber inlay.EPDM rubber resistant to aging.

Application:

1.Used for mounting of pipes to the walls (vertical / horizontal),ceilings and floors

2.For Suspending Stationary Non-Insulated Copper Tubing Lines

3.Being fasteners for pipe lines such as heating,sanitary and waste water pipes;to walls,ceilings and floors.

4.Side screws are protected against loss during assemble with the help of plastic washers

 

Usage:

1.steel pipes

2.cast iron pipes

pper pipes

4.glass pipes

5.plastic pipes

 

Field:

1.sanitary and heating installations

2.gas distribution systems

3.air conditioning systems

 

 

 

Technical data:

 

Article   Number	Pipe Dia.	Clamping range	Material	Thread	Locking     screw	Rubber         mm	PKG	Min.torque	Fzul
			b x s	G
	Inch	mm	mm				pcs/box	Nm	KN
806012	1/4"	12-14	20x1.5	M8	M5X25	20X3.8	150	80	1.2
806015	3/8"	15-19	20x1.5	M8	M5X25	20x3.8	150	80	1.2
806021	1/2"	21-23	20x1.5	M8	M5X25	20x3.8	100	80	1.2
806026	3/4"	26-28	20x1.5	M8	M5X25	20x3.8	100	80	1.2
806032	1"	32-35	20x1.5	M8	M5X25	20x3.8	100	80	1.2
806040	1-1/4"	40-43	20x1.5	M8	M5X25	20x3.8	50	80	1.2
806048	1-1/2"	48-56	20x1.5	M8	M5X30	20x3.8	50	80	1.2
806057	2"	57-61	20x1.5	M8	M5X30	20x3.8	50	80	1.2
806063		63-67	20x1.5	M8	M5X30	20x3.8	50	80	1.2
806074	2-1/2"	74-80	20x1.5	M8	M5X30	20x3.8	50	80	1.2
806083	3'	83-91	20x1.5	M8	M5X30	20x3.8	50	80	1.2
806100		100-105	23x2.0	M8/10	M6X35	23x3.8	25	90	1.5
806108	4"	108-114	23x2.0	M8/10	M6X35	23x3.8	25	90	1.5
806115		115-125	23x2.0	M8/10	M6X35	23x3.8	25	90	1.5
806135	5"	135-140	23x2.0	M8/10	M6X35	23x3.8	25	90	1.5
806140		140-144	23x2.0	M8/10	M6X35	23x3.8	25	90	1.5
806159	6"	159-169	23x2.0	M8/10	M6X35	23x3.8	20	90	1.5