Product Details

Specifications

ROLLING MACHINE(3R, 4R)
1:CNC/NC control
2:Pre-bending functions
3:Hydraulic or mechanical

SW SERIES ROLLING MACHINE FOR PLATE METAL

This machine is the general equipment used for bending plates. Pre-bending and bending can be completed on the machine without U-turn. Plates can be bended to be tubular, arc or even cone-shaped work pieces with supplemental device. The machine is optimal equipment with four rollers to bend metal plates.

Features:

1. Pre-bending and bending can be completed without reversing end for end.
2. After plate fed, alignment can be finished by side rollers.
3. Plate can be leveled sketchily on the machine.
4. Surplus of pre-bending is short and all kinds of defective reel can be regulated.
5. It is convenient to bend cone-shaped work pieces.

Parameters:

Model	Max. Plate Thickness (mm)	Max. pre- bending thickness (mm)	Max. plate width (mm)	Upper roller pressure (ton)	Min. diameter of Max. plate thickness (mm)	Upper roller diameter (mm)	Bottom roller diameter (mm)	Two Bottom rollers center space (mm)	Motor power (KW)
Model	Max. Plate Thickness (mm)	Max. pre- bending thickness (mm)	Max. plate width (mm)	Upper roller pressure (ton)	Min. diameter of Max. plate thickness (mm)	Upper roller diameter (mm)	Bottom roller diameter (mm)	Two Bottom rollers center space (mm)	Roller rotate	Hydraulic system	Bottom roller move
SW11SNC-6×2000	6	4.5	2000	25	380	205	125	160	3	2.2	1.1
SW11SNC-8×2000	8	6	2000	35	450	220	135	180	4	2.2	1.1
SW11SNC-8×2500	8	6	2500	55	500	255	145	200	7.5	4	1.1
SW11SNC-12×2000	12	9	2000	65	500	255	150	245	7.5	4	1.1
SW11SNC-12×2500	12	9	2500	75	650	270	150	245	11	4	1.5
SW11SNC-12×3000	12	9	3000	75	750	290	150	245	11	4	1.5
SW11SNC-16×2000	16	12	2000	75	650	260	150	245	11	4	1.5
SW11SNC-16×2500	16	12	2500	100	750	300	165	270	15	5.5	1.5
SW11SNC-16×3200	16	12	3200	130	850	320	180	300	15	5.5	2.2
SW11SNC-20×2000	20	16	2000	100	750	300	165	270	15	5.5	2.2
SW11SNC-20×2500	20	16	2500	130	800	330	180	300	15	5.5	2.2
SW11SNC-20×3000	20	16	3000	190	950	375	200	360	22	7.5	4
SW11SNC-25×2000	25	20	2000	130	1000	320	180	300	15	5.5	2.2
SW11SNC-25×2500	25	20	2500	190	950	380	220	360	30	7.5	4
SW11SNC-25×3200	25	20	3200	240	1100	410	235	380	30	11	4