Name: CE / IEC Standard Simulate Real Environment Climatic Test Chambers For Electronic Life Testing
Brand: KOMEG
Availability: InStock

Product Details

Product Description

1. KOMEG Temperature Humidity Test Chamber Controller Features:

Using company owned brand KOMEG KM-5166 LCD touch screen controller with PID control parameters setting

Flexible approach for data collection and recording

Temperature and humidity settings (SV) Practical (PV) value can be displayed directly,

Execution of the program can display numbers, paragraphs, remaining time and cycles, running time display,

Program editing and graphic curve display,

Fixed or program operation status display,

10-inch TFT display screen.

2. High temperature limits of test chambers

There are many types of test chambers, but they all high and low temperature limits. Let's take a look at the typical high temperatures thresholds and why they exist.

Test chambers usually have wire heaters made of a material called Nichrome. By placing successive loops of heater wire, a greater amount of heat that is generated. The result looks a lot like the inside of a toaster. Fans circulate the air past the heaters, so the samples in the chamber are not exposed to radiant heat. It is very easy to add heaters and increase the speed and / or high limit of a chamber.

KOMEG chambers typically have a high temperature limits under 200°C. Here is a break-down of why a chamber's high temperature limit exists:

3. Standard Met and Implemented:

GB/Bb T2423.2-89 high temperature test method

GB2423.1-89 test A: low temperature test method

GJB150.4-1986 test at low temperature

IEC60068-2-1 low temperature test method

IEC60068-2-38 temperature cycle

IEC60068-2-78 constant humidity temperature

MIL - STD - 202G - 103B humidity test

IEC60068-2-30 humidity temperature cycle

GB/T2423.3 constant humidity heat test method

4. Temperature Humidity Test Chamber Parameter Specifications:

The specifications is measured in the environment of + 25 ℃, temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet.

Environmental Temperature and Humidity Chamber
Secifications ( at +20ºC room temp. Or+25ºC water temp with empty load)
Model		KMH-R series					KMH-L series					KMH-S series
		150R	225R	408R	800R	1000R	150L	225L	408L	800L	1000L	225S	408S	800S	1000S
Temp. range		-20ºC~150ºC					-40 ºC~+150ºC					-70ºC~+150ºC
Interior sizel	W(mm)	600	700	700	1000	1000	600	700	700	1000	1000	700	700	1000	1000
	H(mm)	600	700	750	1000	1000	600	700	750	1000	1000	700	750	1000	1000
	D(mm)	460	480	800	800	1000	460	480	800	800	1000	480	800	800	1000
Exterior size	W(mm)	880	980	980	1280	1280	880	980	980	1280	1280	980	980	1280	1280
	H(mm)	1730	1890	1940	2160	2160	1730	1890	1940	2160	2160	1890	1940	2160	2160
	D(mm)	1400	1460	1740	1750	1950	1400	1460	1740	1750	1950	1460	1740	1750	1950
Power(KW)		5.8	6	7.5	12.8	12.8	7.5	7.5	8.5	14.5	14.5	9.5	10.6	18.5	18.5
Weight(KG)		240	280	400	500	580	250	300	420	530	600	330	450	550	650
Humidity uniformity		±3.0%R.H			±5.0%R.H		±3.0%R.H			±5.0%R.H		±3.0%R.H		±5.0%R.H
Heat up time		-20ºC~+100ºC,within 35 min					-40ºC~+100ºC, within 45 min					-70ºC~+100ºC,within 60 min
Pull down time		+20ºC~-20ºC, within 45 min					+20ºC~-40ºC , within 60 min					+20ºC~-70ºC,within 80 min
Standard accessories		Sight window1, cable port(portΦ50mm)1, shelves2, chamber lamp1, power cable *2m
Safety device (standard)		No fuse breaker, over pressureover heat and over current protection for compressor,
		Over temp. protect, over load protect of blower, dry heat protection
Control System		Balanced Temperature & Humidity Control System
Refrigeration system		Air Cooled (Water Cooled Type is option)
		Hermetic compressor,Single stage refrigeration system
		CFC-Free refrigerant(HFC-507/HFC-23)
Controller		Panel:7-inch LCD Touch panel, Chinese or English display selectable
		Operation model :Program or fix point running
		Memory capacity :120programs,1200steps,
		All repeat 999 cycles, part repeat 99 cycles
Humidity Range		20~98%R.H
Temp. constancy		±0.5ºC
Humidity constancy		±2.5%R.H
Temp. uniformity		±2.0ºC
Interior material		Stainless Steel Plate(SUS 304)
Exterior material		Baked Painting Steel Or Stainless steel(SUS304)
Insulation material		Rigid polyurethane Foam and Glass Fiber Wool
Ambient Temp.		+5ºC~+35ºC
Wiring method		AC 380±10%50Hz ,3 phase 4 wires +Ground Wires
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

5. Advantages --- Why KOMEG IS Your Right Choice?

Benefits more than you can get from other supplier.

1 Delicate touch and excellent user experience

2. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design; built-in LED lights to facilitate the test sample state of real-time observation in the course of testing; double door design, the inner big glass door with hand-in holes for the convenient operating.

3. Material quality of inner box is SUS304 # mounted stainless steel imported, and outer box is steel plate and the paint process applies automobile coating technology. Box body is processed shape using Triumph processing machine, its shape is nice and neat.

4. Large-size Full Color LCD touchscreen displayer, simple operation, easy to edit programs. PID with automatic calculation function; self-diagnostic function, show failure message and failure shot solutions step by step.

5. An RS-232 and RS-485 communication interface, matching recorder, strong expandability. We also support remote control by PC via wifi or wire (recommended).

Detailed Images

Packing & Delivery

Certifications

After-Sales Service

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.