Name: KOMEG Quick Delivery Intelligent Salt Spray Corrosion Testing Equipment
Brand: KOMEG
Availability: InStock

Product Details

KOMEG Quick Delivery Intelligent Salt Spray Corrosion Testing Equipment

1. Heating system:

Adopt direct heating way,fast rate of temperature increase so reduce the standby time, when reach the temperature,automatic shift temperature constant state,accuracy temperature, low power consumption. Pure titanium heating tube, resistance to acid and alkali corrosion,overlength working life.

2. Control system:

1) Test room,pressure barrel adopt liquid crystal type double-digit controller,with the microcomputer’s function of auto-calculation,control error of ±1.0℃(Japan DHC).

The circuit board has dealed with dampproof and anti-corrosion, high accuracy, long life.

2)Test room heating groove adopt liquid expand safe temperature controller of 0~120℃(Italy EGO).

3) Liquid crystal digital readout can program the time controller,memory function of power cut is 0.1S~9990hr(Japan DHC).

4) ime-integrating 0~9999hr(Italy VEMER).

5) Relay(Japan OMRON)

6) Wane with lamp switch, continuously working 25000 next.

3. Specifications:

Specifications (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-90-BS	HL-60-SS
Interior dimensions(WHD)mm	16005001000	900500600	*600400450*
Exterior dimensions(WHD)mm	224015001600	14601280910	*11301070630*
Volume(L)	800	270	108
Heater	15KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	1/2HP	1/2HP
Temp. range	35±1℃~50±1℃
Test applicable	NSS, ACSS,CASS,CORK
Power	AC220V 1Φ 50Hz

4. Features:

A. The whole part of the device is made of P.V.C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
B. The test chamber is heated from five directions in order to ensure the temperature difference in the chamber may be kept within (± 1℃).
C. Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
D. HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
E. Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P.I.D. temperature control unit to limit the temperature difference within the range of ± 0.5℃.
F. A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensure continuous spray test.
G. Use full automatic detecting system, test stopped automatic, and lighting display when trouble.

5. Technical base:

According to the standard parameter of JIS, ASTM, CNS, GB.

1) Corrosion resistance test: CASS

Test room: 35℃±1℃; 50℃±1℃

Air pressure barrels: 47℃±1℃; 63℃±1℃

6. Salt Spray Test Chamber System Diagram

7. Combined Cycle Tester System Diagram

8. Packing Info:

PP film First and strong plywood case:

We provide two ways for your choice about packing:

A, Pack up directly, this needn't your more work but a bigger packing size;

B, Packing after tearing down the front drainage outlet and the back stents, then the package size and weight will become less. even you can choose to deliver by air. You just need to install the drainage outlets and stents again, but that's very easy. For example: