Name: Large Inner Glass Door climatic test chamber with temi880 controller available
Brand: KOMEG
Availability: InStock

Product Details

Large Inner Glass Door climatic test chamber with temi880 controller available

1. Temperature Humidity Test Chamber View:

Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing equipment and test methods for the basic parameters of electric and electronic products under the condition of humidity, low temperature, high temperature, and constant heat.

Suitable for electrical, electronics, machinery and other products, parts, materials, etc. under high or low temperature conditions on the products, parts, materials quality and reliability testing.

2. High temperature limits of test chambers

There are many types of test chambers, but they all high and low temperature limits. Let's take a look at the typical high temperatures thresholds and why they exist.

Test chambers usually have wire heaters made of a material called Nichrome. By placing successive loops of heater wire, a greater amount of heat that is generated. The result looks a lot like the inside of a toaster. Fans circulate the air past the heaters, so the samples in the chamber are not exposed to radiant heat. It is very easy to add heaters and increase the speed and / or high limit of a chamber.

KOMEG chambers typically have a high temperature limits under 200°C. Here is a break-down of why a chamber's high temperature limit exists:

3. Standard Met and Implemented:

GB-2423. 1-89 (IEC68-2-1)Test A: Low Temperature Test

GB-2423. 2-89 (IEC68-2-2)Test B: High Temperature Test

GJB360. 8-87 (MIL-STD. 202F) High Temperature Life Test

GBJl50. 3 (MIL-STD-810D) High Temperature Test

GJBl50. 4 (MIL-STD-810D) Low Temperature Test

GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test

4. Humidity Temperature Chamber Parameter Specifications:

Model		KMH-800L
		150L chamber volume
Temp. range		-40°C ~150°C
Display resolution		0.1°C
Temperature stability		High±0.5°C ,low ±1.0°C
Temperature uniformity		±2.0°C
Heat up time		-40°C ~+100°C,within 45 min
Pull down time		+20°C ~-40°C,within 60 min
Interior Dimension(mm)		W 1000 x H 1000 x D 800mm
Exterior Dimension(mm)		W 1280 x H 2160 x D 1750mm
Interior material		Stainless Steel Plate ( SUS 304)
Exterior material		Baked Painting Steel Or Stainless steel ( SUS304)
Insulation material		Rigid polyurethane Foam and Glass Fiber Wool
Total power		7KW(heater 3KW included)
Max current		13.6A
Ambient Temp.		+5°C ~+35°C
Power Supply		AC 380V±10% 50Hz ,3 phase 4 wires +Ground Wires
Weight		420KG
Sight window size		430 X 530mm
Sample holder		2 pcs
Fittings		cable port(portΦ50mm)1, chamber lamp1, power cable *2m
Safety device (standard)		No fuse breaker,over pressure,over heat&over current protect,over temp. protect, over load protect for blower, dry heat protect
Control System		Balanced Temperature & Humidity Control (BTHC)System
Refrigeration system		Air Cooled (Water Cooled is option)
		Hermetic compressor
		Single stage refrigeration system, CFC-Free refrigerant(HFC-507/HFC-23)
Controller		7-inch LCD Touch Screen panel
		Operation model :Program or fix point running
		Memory capacity :120programs,1200steps,
		All repeat 999 cycles, part repeat 99 cycles
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

5. Technology Advantages: KOMEG provide you excellent test chambers

1. Trumphy processing machine and car coating technology let the tets chamber feel delicate touch and excellent user experience

To keep its outstanding appearance in long term service, we apply the coating technology of automotive for the surface treatment:

Acid-cleaning, coslettise, drying, spraying, baking, then packing back.

This technology hardly causes coating damage. Long time no lose color.

It’s easy for cleaning and maintenance.

2. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design; built-in LED lights to facilitate the test sample state of real-time observation in the course of testing; double door design, the inner big glass door with hand-in holes for the convenient operating.

6. Packaging:

Programmable Climatic Test Chambers are covered with air bubble film before put them into the strong plywood case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.