Specifications

DF-Series LLDPE Stretch Warp Film Making Machine
It is used for producing LDPE or LLDPE.stretch film

DF-Series LLDPE Stretch Warp Film Making Machine
It is used for producing LDPE or LLDPE.stretch film

 

 

 

Characteristic:
1.Screw and cylinder are all made of 38CRMOALA alloy and treates by nitrogen,It has an advantage of corrosion resistance and endurance etc. 2.The cooling device adopts cycle water cooling provide the best transparent effect of the stretch film. 3.Take-up equipment adopts with friction type rewinding and equipment with edge correcting device to ensure the quality.

 

Specification:
TheSingle/Double-layer Co-extrusion Stretch Film Machineset is used for producing LDPE or LLDPE.stretch film, which is equipped with single screw, the extruded stretchsides adhesive, If the machine adopts double screws, the two hoppers should use different type of material, one side of the extruded stretch film is adhesive and the other side is normal, It is widely used for packing architecture and hardware parts etc.

 

*Optional Equipment:
1.Autoing Loader
2. Dry hopper
3. Air shift                                  
4.Auto winder changer
5. Auto screen changer     
6.Glue pump

 

Model	DF-55	DF-65
Diameter of Screw Stem	55mm	65mm
Major diameter ratio of screw Stem(L/D)	30:1(L/D)	30:1(L/D)
Rationl speed of screw stem	10-120rpm	10-120rpm
Folding Width of Products	200-500mm	200-500mm
Thickness	0.015-0.04mm	0.015-0.04mm
Main motor power	15kw	18.5kw
Heating Power	15kw	20kw
Machine weight	2.2T	3T
Overall Dimensions (L*W*H)	5600*1500*1800mm	6000*1500*2500mm