KOMEG   Light modules walk in/ burn in humidity testing climatic chamber standards with LED controller

Laboratory test chamber  applicable to environmental adaptability and reliability testing in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc.

1. Heat preservation material, we use high-intensity PU foam with flame retardant material and high density glass fiber cotton, which can assure high precise and better uniformity and avoid unnecessary energy loss. Meanwhile, our design can better assure personnel safety when operating a Walk-in Chamber.

2. Large glass window design, viewing angle in all directions, hollow electric plating film and anti-condensation design; built-in LED lights to facilitate the test sample state of real-time observation in the course of testing; double door design, the inner big glass door with hand-in holes for the convenient operating.

3.   Material quality of inner box is SUS304 # mounted stainless steel imported, and outer box is steel plate and the paint process applies automobile coating technology. Box body is processed shape using Triumph processing machine, its shape is nice and neat.

4. Large-size Full Color LCD touchscreen displayer, simple operation, easy to edit programs. PID with automatic calculation function; self-diagnostic function, show failure message and failure shot solutions step by step.

5. An RS-232 and RS-485 communication interface, matching recorder, strong expandability. We also support remote control by PC via wifi or wire (recommended).

6. With timing contact, and be able to cope with dynamic testing and measure test. 

7. The system-wide multi-security protection, two steps password to ensure the chamber’s smooth running and power-cut memory. General running mode: programmable running, constant running and booking boot.

8. Freezer/Compressor imported by the French original armored warrior Tecumseh compressor or GEA, and use environmental-friendly refrigerant (R404a, R23).

9.  Refrigeration system uses units or low-temperature dual-loop system design.

10. Use more powerful wing-blower air supply cycle, to avoid any dead end, temperature and humidity are evenly distributed in the test space.

11. Air circulation adopted the design of blowing side wind and return wind. Wind pressure and wind speed are in accord with test standards GB, MIL, and make the door instantaneous temperature and humidity open that is stabilized time soon.

12. Heating, cooling, humidification and dehumidification system is totally independently to improve efficiency, reduce testing cost, increase life expectancy and decrease failure rate.

Machine Parts

Name: Bock Compressor

Brand: Bock

Original: Germany 

Hermetic compressor, stag refrigeration system, Compressor rack, high efficiency low energy consumption, low noise;

Electronic components

Name: Electric cabinet
Brand: Schneider, DANFOSS, Omron, Panasonic 
Original: Germany, France, Japan 
Top brand electronics, with full range of protection include overheat of blower fan motor, earth leakage protection, load short circuit protection, over temperature protection, over pressure protection and so on. 

Control System

Name: Controller
Brand: KOMEG/SAMWON  
Original: China/South Korea

127 program, running  for extremely long time,999 hours per segment, maximum 3200 times circulationsupport RS485,LAN (internet access).
It can control temperature and humdity constantly such as thermo-hygrostat mounted on, termperature, humidity, respectively, by setting the PID values for each interval can be precisely controlled and easy control via PC or mobile is possible. 

 

 

Why KOMEG IS Your Right Choice? 

Seven  Reasons to Buy from KOMEG:

1. We appreciate you, the customer, and we always treat our customers with the greatest consideration and courtesy. And before placing order, we engineer team will recommend you the best scheme according to your technical requirements and testing conditions.

2. Your order will be filled accurately and shipped promptly. We have strict management on the production procedure, and over 26 years experiences in environmental simulation climatic test chambers industrial.  Keep good cooperation relationship with many enterprise like HUAWEI, GREE, KONKA, MONICA MINOLTA,UL, SGS, APPLUS, SAMSUNG, LG, etc.

3. We'll do our best to remedy any problem you might have with a purchase. We have a special after-sales team, will respond effectively within 24 hours, and provide solutions with 48 hours. We believe we have an obligation to give you our best if you purchase from us.

4. You won't pay too much. Our volume buying and low overhead assures you of a low price and top quality new products.

5. How we ensure the quality and reliability of test chambers? We apply world well-known brands for the main and key parts: for compressor, Tecumseh, GEA, York, Dunhambush, etc.; for cooling system, the heart of the climatic test chamber, Danfoss, EMERSON, Saginomiya, etc. ; for electrical parts, OMRON, Schneider, Shilin, etc.

6. We provide customer human and art experience when operating our test chambers: the outlook is nice and neat (remarks from a European customer when inspecting our factory), our plate metals is processed by Trumbend and coated by automobile coating technology.

7. We'll be here tomorrow. Our business has been headquartered in Songshan Lake, Guangdong for over twenty-six years. And will open a branch in Europe(actually it’s under planning)