Standard: ISO 13918 and AWS D 1.1
Shear Connector(M10-M25)
Standard: ISO 13918; AWS D1.1,ASTM A108
Material: carbon steel
Mechanical properties:
Tensile strength >= 450N/mm2
Yield strength >= 350N/mm2
Elongation >= 15%.
Length : 50mm~300mm.
Testing of Hazardous Substances.
Releasing of hazardous substances can be assessed indirectly by controlling the content of substances in the materials used.
Dimensional requirements studs testing.
The dimensions of the studs should be checked by standard gauges or measuring equipment with an uncertainty less than or equal to 10% of the tolerances
Shear Stud Connector type SD (ISO 13918) Dimensions (in mm) | ||||||
d1-0.4 | 10 | 13 | 16 | 19 | 22 | 25 |
d5±0.3 | 19 | 25 | 32 | 32 | 35 | 41 |
d3±0.3 | 13 | 17 | 21 | 23 | 29 | 31 |
h3±0.5 | 7 | 8 | 8 | 10 | 10 | 12 |
h4 | 2.5 | 3 | 4.5 | 6 | 6 | 7 |
L1±1.5 | 40-105 | 40-160 | 40-200 | 40-250 | 60-250 | 60-250 |
Burn off | 3 | 3 | 4 | 5 | 5 | 6 |
Ferrule | UF10 | UF13 | UF16 | UF19 | UF22 | UF25 |
1.Burn off value shown are for welding to bare steel
2.There are two kinds of ceramic ferrule, one is through deck type which has 8 teeth, the other
one is common type which has 18 teeth. The price is same for these two types.
3.The UFB type ceramic ferrule are for through deck welding , with 8 teeth !
Shear Stud Connector type SC (AWS D1.1) in inch. | ||||
| 1/2-0.01 | 5/8-0.01 | 3/4-0.015 | 7/8-0.015 |
d5±1/64 | 1 | 1-1/4 | 1-1/4 | 1-3/8 |
h3 | 9/32 | 9/32 | 3/8 | 3.8 |
L1±1/16 | 2-5.9 | 2-7.874 | 2-9.84 | 3.15-9.84 |
Burn off | 0.125 | 0.187 | 0.187 | 0.187 |
Ferrule | UF13 | UF16 | UF19 | UF22 |
Chemical Component Of Material (%) | ||||||
Material | C | Si | Mn | P | S | Al |
ML15AL | 0.13-0.18 | ≤0.10 | 0.30-0.60 | ≤0.035 | ≤0.035 | ≥0.020 |
SWRCH18A | 0.15-0.20 | ≤0.10 | 0.60-0.90 | ≤0.030 | ≤0.035 | ≥0.020 |
Mechanical Properties Of Shear Stud Connector | ||||
Country | Tensile strength | Yield point | Elongation percentage | Contraction percentage |
BS EN ISO13918:2008 | ≥450 | ≥350 | ≥15 |
|
USA | ≥415 | ≥345 | ≥20 | ≥50 |
CHINA | ≥400 | ≥320 | ≥14 |
|
By advanced production technology and strictly inspection system, our shear stud
connectors meet the standard of EN ISO 13918 or AWS D1.1, both dimensions and
mechanical properties are according to the above standards:
Tensile strength min. 450Mpa, Yield strength min. 350Mpa, Elongation min 15%, etc.