Specifications

LED rigid light bar

1.Product introduction:

 high brightness, low decay, wide viewing angle

aluminum alloy shell, shockproof

epoxy glue as the waterproof material, IP 65

heat sink, nice appearance

Widely used for advertising decoration, interior decoration, local lighting, etc

2.Product Key parameter

1. led type: SMD 5050
2. Colors available: red, green, blue, yellow, pure white (5500-6500K), warm white(2700-3200K), cool white(7000-9000K)
3. Viewing angle: 120
4. Lumens : (unit: lm)

6. LED quantity: 108pcs /1.8m

7. LED lifespan: 30K-50K hours

3.Product Electric parameter:

Working voltage: DC 12V

Current: 2.16A

Power consumption: 26W, 1pc 12V 60W transformer can drive 2pcs 1.8m SMD 5050 light bar.

Drive way: constant voltage.

4.Product Connection:

lead: 75mm long, 20AWG grey and white wires, grey wire is for anode and white wire is for cathode.

standard length for connection: 10m

max connection length for connection: <=5pcs (10m)

5.Product working condition:

working temperature : -30°C——45°C

storage temperature : -50°C——60°C

IP rating: IP65

 6.Product dimmention:

7.Product connection:

Note:

1. Thickness of wires for adapter is up to the max actual current, power of the light, length of the wire and power loss on the wires, etc.
2. Please try to do waterproof solutions for the connection wires of the light when you connect two pcs together.
3. No static touch and repairing when electricity is on.
4. Max length for connection of the 1.8m light bar is 10M, so totally 5pcs for the max, please do not connect more than 5pcs in one line.
5. please use eligible transformers to drive the light bars (with protection of short circuit, over voltage, overloading, etc.)