Specifications

Square LED Wall Washer:
1.Factory sale direct
2.Power:12*1W
3.Viewing angle:30
4.Light source:1W high power single color

Square LED Wall Washer:

1. Power:12*1W

2.Luminance:780Lm

3.Voltage:AC 100-240V

4.Viewing angle:30°

5.Light source:1W high power single color LED

6.Color:PW/WW/R/B

7.Length of standard exposed wire:1m

8.Net weight:2.3kg

9.Dimension:179*120*165.3mm(including bracket)

10.IP65

Applications:

1.Tunnel, Subway, Underground Lighting
2.Gymnasium, Sports Stadium Lighting
3.Building, Billboard Lighting
4.Gas Station, Garage Lighting
5.Park, Garden Lighting
6.Workshop, Factory Lighting;
7.Warehouse, Storage Lighting
8.Yard, Square Lighting
9.Road,Highway Lighting
10.Station,Dock Lighting

Attention:

1.Please consider about” the working condition”, the lamp can not be put in water for long time

2.Each RGB wall washer takes up 3 DMX addresses, the first wall washer’s address plus 3 is the address for the next one.

3.If you want all connected wall washers to change colors together, you should set the same address for all the washers

4.Please set the address from smaller to bigger.

>The maximum address of RGB wall washer should be less than 510.

>There should be only one main flood light as a master (the flood light works in main control mode, control box or control console).

5.When there are many wall washer connected together, the connections please refer to theconnection diagram.

6.The connection cable between two controllers, or between console and signal amplifiers. It can’t exceed 100m; The distance between the first signals amplifier or console and the last flood light can’t exceed 100m.