Specifications

1.good heat dissipation.
2 low power consumption,.
3.long lifespan,.
4.impact resistance, high reliability.
5 energy saving.

 Product Introduction

Our new LED Street light adopts unique individual modular design, the protection class for single module is IP65, build-in high power LED module, PC Cover with optical lens is made of optical PC material, novel appearance, good heat dissipation, low power consumption, long lifespan, impact resistance, high reliability, energy saving and environmental protection, soft light color, high brightness and pure color, average life expectancy of LED can reach 50,000hours.

 

Beam angle for entire lamp: 160°*85°, it's compliance with road lighting requirements.

 

Adjustable beam angle, which is convenient to replace traditional lights.

 

The fixture is with unique design, good heat dissipation, low power consumption, long lifespan, impact resistance, high reliability, energy saving and high luminous flux etc.

 

 

Application

 

It is IP65 and the working temperature is -20°C~45°C, it can adapt various range of temperature and humidity, which can be widely used in urban expressway, main road and branch road,etc.

 

 

Technical Parameter

 

 SMALITE  1W LED Series

Item NO.	SL3032		SL3048		SL3064			SL3080			SL3096			SL3112		SL3128
Qty. of Modules	2		3			4			5			6	7		8
Input Voltage (V)	AC 90-277V
Wattage (Watts)	32		48		64			80			96			112		128
Luminous Flux(LM)	2600		3900		5200			6500			7800			9100		10300
Beam Angle (°)	85*160
CCT(K)	Daylight White: 4500±275/ Pure White: 6000±355						Warm White: 3500±300/ Pure White: 6000±500
Efficiency of Power Supply	>90%
Standard length of Cable (m)	0.6
Connection Port	Power supply: 3-pin rubber bare wire 3X1.0mm2
Net Weight ( KG)	7.6	8.6		9.6			10.6			11.6			12.6		13.6
IP Rate	IP65

 

 

 

  

 Installation and connection

Each lampt should get  AC 90-277V individually. 

 

 

 

 

Notice

 

Installation instruction:

 

1. Please make sure there is no short circuit before turn on the power, otherwise the parts of the device would be burn out.

 

2. Please make sure there is no corrosive, inflammability and explosive material around the lamps.

 

 

 

Note:

 

A. Make sure the power is be turned off while installation or dismounting.

 

B. Please replace with new lamp when the lamp body is defected.

 

 

 

Problems and solutions:

 

1. If the light cannot light up, please check whether it connects with power supply well and whether the switch is on.

 

2. If the light turns on and off frequently, please check whether the connection between power and lamp is fixed enough.

 

 

 

Note: Please contact professionals in case of above solutions do not work; please try to contact professionals instead of open the light at once.