Specifications

1.With IP67 rank
2.- 20 ~ 45 working temperature
3.Humidity difference
4.Long lifespan:50000hours

Introduction

 

Made up of RED, GREEN and BLUE high power LED, the inground lights can realize more than 16,770,000 kinds of color output, and with great effect and colorful features. It adopts wires with 4pin connectors, and work with 4-wire and 3-loop controller,which can achieve Gradual Change, jumping and many good light effect.

 

Application

 

With IP67 rank and-20°C~45°C working temperature,the inground lights can adapt to a variety of indoor and outdoor temperature, humidity difference. They can be widely used in decoration of the buildings, stage, ancient buildings, shopping malls, hotel, cultural place and so on.

 

Technical parameters

 

Part. No.	IN2E11/IN2C11/     IN2B11/IN2D11	IN2E13	IN2E16	IN2E19
Rated Voltage(V)	DC12	DC12V	DC24V	DC24V
Maximum power(W)	3.8	9	14.4	26.4
Maximum Current(mA)	320 mA	750MA	600	1100
Controlling system	4-wire and 3-loop controller,Simple DMX controller
Standard lens	45°Bead surface
Light source	RGB3in1   3W LED
White light flux(LM)	52	140	254	441
Standard length of left wires	250mm
IP rank	IP67

 

Connection interface

 blackRubber wire with 4pins

 

 Controlling way

 

The inground lights should be work with 4-wire and 3-loop controller,Simple DMX controller ( Please refer to the instruction for operation ) With a remote controller, 4-wire and 3-loop controller can be chose single mode optical efficiency, total 13 kinds, and also it can stteing the address of the controller to accept DMX signal and control the brightness. However, Controller drive capability is limited,eg. The max data if the 12V 10A remote RGB controller can drive is 120W(=12V*10A)inground lights, and take 3.8W( max power ) 1*3W RGBinground light as another example, the controller just can drive 31pcs(120/3.8≈31).The maximum number of connections power of other inground lights calculated in this way.RGB amplifiers are needed when you want to connect more lights together..