Product Details

Hard Rock Crusher Pe 600*900

Specifications Hard Rock Crusher Pe 600*900

1.China No.1 Roller Press Manufacture.

2.Extremely reliable.
3.Easy maintanence.
4.High efficience.

5.ISO9001:2008; CE

Introduction of Hard Rock Crusher Pe 600*900

PE Series Jaw crusher are used for the primary and secondary crushing of hard material. There are two types of crusher, including coarse jaw crusher and fine jaw crusher. Jaw crusher is especially used in mining and construction industries, it is especially fit to crush various stone and ores that compression strength less than 300Mpa , such as
Hard stone: granite,quartz stone, basalt, dolomite, basalt etc.
Hard ores: iron ore, copper ore, gold ore, phosphorus ore, silicon etc.
Soft stone and ores:coal, limestone,petroleum coke etc.

This crusher is designed to improve crushing efficiency, saving more energy, increase production capacity, and to obintain higher economic benifits.

Advantages of Hard Rock Crusher Pe 600*900

1 Less noise and dust.
2 High crushing ratio, improving production efficiency.
3 Simple structure, safe work, low operating cost.
4 Deep crushing chamber with no dead zone, improves the feeding size which leads to a high capacity.
5 Equipment energy-saving: save 15%-30% energy,save system energy more than twice.
6 Gasket discharge gate adjusting device makes it more convenient to use.

Hard Rock Crusher Pe 600*900 Working Principle

The working part of the jaw crusher is two pieces of jaw plate, one is fixed on the front wall of machine body, which is called fixed jaw, the other is swing jaw, which forming a crushing chamber with the fixed jaw, move back and forth periodically. When separating, the material enters into the crushing chamber and then the particle drops out from the bottom; when they get closer, the material is crushed by the compressive force, then the final product get out from the lower outlet.

Parameter of Hard Rock Crusher Pe 600*900

Model	Feed opening (mm)	Max.feeding size (mm)	Adjusting range of discharge opening (mm)	Processing capacity (t/h)	Rotation speed of eccentric shaft (r/min)	Motor power (kw)	Total weight (t)	Dimensions (L×W×H) (mm)
PE-150×250	150×250	125	10-40	1-3	250	5.5	0.8	720×660×850
PE-200×300	200×300	180	15-50	2-6	260	7.5	1.2	910×750×990
PE-200×350	200×350	180	18-70	3-10	260	11	1.5	1000×870×990
PE-250×400	250×400	210	20-60	5-20	300	15	2.8	1300×1090×1270
PE-400×600	400×600	340	40-100	16-60	275	30	7	1730×1730×1630
PE-500×750	500×750	425	50-100	40-110	275	55	12	1980×2080×1870
PE-600×750	600×750	500	150-200	80-240	275	55	15.8	2070×2000×1920
PE-600×900	600×900	500	65-160	50-180	250	55	17	2190×2206×2300
PE-750×1060	750×1060	630	80-140	110-320	250	110	29	2660×2430×2800
PE-800×1060	800×1060	640	130-190	130-330	250	110	29.8	2710×2430×2800
PE-830×1060	830×1060	650	160-220	150-336	250	110	30.7	2740×2430×2800
PE-870×1060	870×1060	660	200-260	190-336	250	110	31.5	2810×2430×2800
PE-900×1060	900×1060	685	230-290	230-390	250	110	33	2870×2420×2940
PE-900×1200	900×1200	750	95-165	220-450	200	110	52	3380×2870×3330
PE-1000×1200	1000×1200	850	195-265	315-500	200	110	55	3480×2876×3330
PE-1200×1500	1200×1500	1020	150-350	400-800	180	160-220	100.9	4200×3300×3500
PE-1500×1800	1500×1800	1200	220-350	500-1000	180	280-355	122	5160×3660×4248
PE-1600×2100	1600×2100	1500	300-400	1300-2200	160	350-380	150.6	6210×4013×4716
PEX-150×750	150×750	120	18-48	8-25	320	15	3.8	1200×1530×1060
PEX-250×750	250×750	210	25-60	13-35	330	30	5.5	1380×1750×1540
PEX-250×1000	250×1000	210	25-60	16-52	330	30	7	1560×1950×1390
PEX-250×1200	250×1200	210	25-60	20-61	330	37	9.7	2140×1660×1500
PEX-300×1300	300×1300	250	20-90	16-105	300	55	15.6	2720×1950×1600

Product Description

Actual picture of the quartz crusher

Key part of the Hard Rock Crusher Pe 600*900

Hard Rock Crusher Pe 600*900 production line