Product Details

Product Description

Tungsten Alloy Ball introduction

1, Diameter: 1.0mm-100.0mm
2, Density: 15.8-18.75 g/cm3
3, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
4, Surface: Sintering surface, Forged surface, Ground surface

Tungsten alloy balls are widely used in Ball valve and Bearing. We can offer various grades and sizes .And the stringent requirements of each procedure to ensure that the products produced comply with your request. We adopts the advanced technical and depend on the imported material .The ball has the high endured causticity and high endure grind, which could improve the life of the bearing, while elevate the value of your products.

High Density Tungsten alloy fishing sinker is made from tungsten alloy. The advantages: nuisance free, international environment protection standard, small body, high density, strong wind resistance. It is the ideal substitute of lead sinker which finds good sales among western countries.

Tungsten Alloy Data Sheet

Type	Density (g/cm³)	Tensile strength (MPa)	Elongation	Hardness (HRC)
85W-10.5Ni-4.5Fe	15.8-16.0	700-1000	20-33	20-30
90W-7Ni-3Fe	16.9-17.1	700-1000	20-33	24-32
90W-6Ni-4Fe	16.7-17.0	700-1000	20-33	24-32
91W-6Ni-3Fe	17.1-17.3	700-1000	15-28	25-30
92W-5Ni-3Fe	17.3-17.5	700-1000	18-28	25-30
92.5W-5Ni-2.5Fe	17.4-17.6	700-1000	25-30	25-30
93W-4Ni-3Fe	17.5-17.6	700-1000	15-25	26-30
93W-4.9Ni-2.1Fe	17.5-17.6	700-1000	15-25	26-30
93W-5Ni-2Fe	17.5-17.6	700-1000	15-25	26-30
95W-3Ni-2Fe	17.9-18.1	700-900	8-15	25-35
95W-3.5Ni-1.5Fe	17.9-18.1	700-900	8-15	25-35
96W-3Ni-1Fe	18.2-18.3	600-800	6-10	30-35
97W-2Ni-1Fe	18.4-18.5	600-800	8-14	30-35
98W-1Ni-1Fe	18.4-18.6	500-800	5-10	30-35
90W-6Ni-4Cu	17.0-17.2	600-800	4-8	25-35
93W-5Ni-2Cu	17.5-17.6	500-600	3-5	25-35