Used Wall Roll Forming Machine
USD $23,000 - $26,000 /Set
Min.Order:1 Set
Hangzhou Willing International Co., Ltd.
We are specialied in making Forming Machine, we can design all kinds of pattern.
Top Quality Standard
High Cost-Effective
1year Service Top
Forming Machine Introduction
Forming Machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table.
Forming Machine Technical Parameters
Model |
| ||
Material | Typle | Pre-painted steel sheet | |
Thickness(mm) | 0.2-0.7 | ||
Yield stress(Mpa) | 230-550 | ||
Max. Forming speed(m/min) | 8-12 | ||
Roller material | 45# steel with chrome treatment | ||
Roller driven type | Chain transmission | ||
Controller | PLC | ||
Operation | Touch screen and button | ||
Hydraulic system pressure(Mpa) | 12 | ||
Hydraulic station motor power(KW) | 3 | ||
Main motor power(KW) | 4~5.5 | ||
Total power(KW) | 7~8.5 | ||
Total weight(Kg) | About 6000~8000 |
Product Information
Material of Forming Machine Main Equipment
Roller Material:high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active Shaft Material:high grade No.45 carbon wrought steel at Φ 75mm.
Cutter Blade:Cr12 mould steel with quenched treatment.
Electric Elements:Control system with PLC model S7-200, Siemins.transducer with ABB control panel with TP170, Siemens. It can input 10sets of spec at one time
Oil Tank Model of Hydraulic System:CB-E310