Product Details

Specifications

Roller driven type: chain transmission
Controller: PLC
Operation: touch screen button
Hydraulic system pressure: 20Mpa

Dry wall stud and track roll forming machine

1. Profile drawing

2. Machine layout

3. Main parameter

Material spec:	Color steel sheet;
Thickness:	0.3 -1.0mm, 1.0-1.5mm
Coil width:	depends
Working speed:	0-15m/min. (Nodal distance at 250mm)
Cutting tolerance:	±2mm
Main motor power:	4Kw
Hydraulic station power:	3Kw
Decoiler	manual decoiler, max capacity 5000kgs
Main roller qty:	about 16 stands but depends on last design
Type of cutting:	Roll-formed and length-set cutting
Main body dimension:	About 5000mm1500mm1400mm

4. Machine picture

5. Working flow

Decoiling the sheet------ Sheet guiding------Flat Sheet Flattening------Set to Length------Roll forming------Finished Profile Rectification------Cutting the Finished Panel------Finished Product Comes out to the Run out Table

6. Standard equipment of machine

5tons passive uncoiler	1set
Guiding Equipment	1set
Roll Forming Equipment	1set
Punching equipment	1set
Post Cut Equipment	1set
Hydraulic Station	1set
PLC Control Penal	1set
Supporter Table	2sets