Product Details

DH32 Shipbuilding steel plate

Specification

ASTM A131 DH32 shipbuilding steel is not only the high tensile strength steel but also is the Hull structural steel. DH32 shipbuilding steel has good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and good welding properties.Shipbuilding steel grade DH32 is used for shipbuilding and oil platform purpose and they are approved by ABS,DNV,GL,BV,LR,NK,RINA and other classification societies.What's more, DH32 shipbuilding steel plate can be used in manufacturing the ship's hull structure whose weight is below 10000 tons.

DH32 Shipbuilding steel plate specification:

Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.

DH32 shipbuilding steel plate Chemical Composition %

Grade	C max	Si max	Mn	P max	S max	Als min	Ti max	Cu max	Cr max	Ni max	Mo max
DH32	0.18	0.50	0.90-1.60	0.035	0.035	0.015	0.02	0.35	0.20	0.40	0.08

Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.36% (thickness ≤ 50mm),≤0.38%( when the thickness >50-100). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

DH32 shipbuilding steel plate MechanicaL Property

Grade	Rm (MPa)	Re(MPa) min	A% min	Akv/J min
DH32	440-570	315	22	E.T °C	Thickness (mm)
				-20	≤ 50		>50-70		>70-100
					L	C	L	C	L	C
					31	22	38	26	46	31

Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

DH32 shipbuilding steel plate Condition Of Delivery

Grade	Fine grains elements	category	The thickness of steel
			≤ 12	>12.5-20	>20-25	>25-35	>35-50	>50-100
DH32	Nb+V or V	Plate/ sheet	A(50)	N(50),CR(50),TM(50)				N(50),CR(25),TM(50)
		Profile steel		N(50),CR(50),TM(50),AR*(25)				-
	Al or Al+Ti	Plate/ sheet	A(50)		AR*(25)		-
					N(50),CR(50),TM(50)			N(50),CR(25),TM(50)
		Profile steel	A(50)	N(50),CR(50),TM(50),AR*(25)				-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .

2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

DH32 shipbuilding steel plate Contrast in the different standard