Specifications

waterborne paint curing lamp

waterborne paint curing lamp 1.Drying time of the water paint will be shorter.
2.When small area needs to be repaired, the heat requirement for the spray booth will be less.
3.Air consumption is lower than 350 L/min (3 bar).
4.Cover large area. The air-quantity of every blower reaches 6000L/min.
5.It is with filtering net to reduce the pollution for the paint film.
6.There are short wave infrared curing lamps on it to dry two groups of paint.
7.The installation position of the blower can be altered so that the direction of the nozzle can be adjusted to the most suitable place.
8.Blower, lamps can be connected to the bracket quickly. It is very stable.
9.The lamp can be moved up and down to adapt to dry different high of workpiece.
10.The caster with brake makes the equipment stop at the slope steadily.
Emitter(lamp) 850m                    Halogen shortwave infrared lamp,1800W
Working voltage 220V,50/60Hz                 Working current 8.5A
Power 1800 W                                  Area coverage 1000mm×400mm
Heating distance 40~50cm                     Temperature 60°C~70°C
Air consumption 350 L/min                     Air pressure 3~3.5bar
MAX air pressure 12bar                        Air volume 6000L/min
Blowing distance 30~50cm