Product Details

WGP0X wireless Manual pulse generator XHC

we are manufacturer

Product description

The Manual For Fully functionl Wireless Handle for Engraving machine:

Typical applications:

A variety of CNC machine tools: Machining center,cnc, Vertical lathe, Longmen milling machine

Longmen engraving and milling machine.

Product model: A-WGP and B-WGP

Support system:

SIEMENS,MITSUBISHI,FANUC,FAGOR,FRANCE NUM,TAIWAI BAOYUAN,XINDAI and so on.

Product features:

1. The handwheel by brand encoder and touch feel is good, the service life is long, the tooth position clear.

2. With LCD display, X axis, Y axis, Z axis, the 4 axis coordinate value, resolution of 1 micron(without LCD display has no function)

3. With rate display 1X, 10X, 100X; having a shaft selected display X, Y, Z, 4, 5, 6

4. Wireless hand wheel, far transmission distance, straight 60 meters can stable operation without obstacle

5. wireless transmission frequency, 433MHZ, power of 10DB, the data encryption transmission, stable and reliable

6. Using 64 channel frequency hopping, have 65536 different identities of ID numbers, the same room, maximum support 64 sets of equipment at the same time, no mutual interference.

7. Wireless handwheel using work two No5 batteries, using low power design, under normal circumstances, can be used for 2 months.

AWGP Mainly for large Longmen machine tool application:

AWGP-2 with display and maximum support 6 shafts, two key button output(The positive rotation, Reversal),1 enable key output

AWGP-3 with display and maximum support 6 shafts, three key button output(the positive rotation,Reversal, Continuous),1 enable key output

AWGP-2T without display and maximum 6 shafts ,two key button output(the positive rotation,reversal), 1 enable key output,1 emergency stop button output

AWGP-3T without display and maximum 6 shafts ,three key button output(the positive rotation,continuous),1 enable key output,1 emergency stop button output

AWGP wireless handwheel can be used large CNC,longmen CNC,can custom different Switch output.

BWGP wireless handwheel mainly used in small CNC, replace the traditional Wired handwheel, The price is cheap, high performance price ratio.

name rules:

MODEL	A/B	W	GP01	-4	-A	3T
NO	A/B	1	2	3	4	5

A: Says the big machine tool series

B: The high performance to price ratio, instead of the conventional wired hand wheel series

The meaning that the serial number

W means wireless handwheel, L means wire handwheel

GP01: Power supply DC5V, 100PPR output pulse, phase output A, B. Two pulse sequences of A and B is 90, the open collector circuit, in which 200 euro 5V pullup resistor

GP02: Power supply DC12V, 25PPR output pulse, phase output of A, B, A and B, two pulse sequence difference of 90, open collector circuit, built-in 2K European 5V pullup resistor

GP03: Power supply DC5V, 100PPR output pulse, phase output of A, /A, B, /B; using differential drive output

3: Said handwheel shaft support 3 X,Y,Z

4: X,Y,Z,4

5: X,Y,Z,4,5

6: X,Y,Z,4,5,6

A:Said shaft by point-to-point output: X axis, X axis and COM conduction; Y, Y and COM through

B: expressed by code output: 2 output, through the 2 hex code, indicating axes selected X or Y or Z etc.

SHAFT:signal	A	B	C	D
OFF	0	0	0	0
X	1	0	0	0
Y	0	1	0	0
Z	1	1	0	0
4	0	0	1	0
5	1	0	1	0

Selection Guide:

MODEL	Parameter description	For the system
GP01	1. The source DC5V, 100PPR output pulse, phase output A, B 2.The two pulse sequences of A and B is 90 3. The open collector circuit, in which 200 euro 5V pullup resistor	The Japan FANUC system, The Taiwan Digiwalker TNC The Taiwan billion figure (HUST) series The home such as aerospace CNC, NC central China, Guangzhou Nordson, Emperor Kaine KND series
GP02	1.The power supply for the DC12V output pulse, 25PPR, phase A output, B 2.The two pulse sequences of A and B is 90 - 3.The open collector circuit, built-in 2K European 5V pullup resistor	The Japanese Mitsubishi MELDAS electronic handwheel (MELDAS M64; M65; E60 system for the power supply DC12V, DC5V output) The Italy SELCA system
GP03	1. The power supply for the DC5V output pulse, 100PPR, phase output of A, /A, B, /B 2.It uses a differential drive output	It is suitable for PC_BASE system, the typical system such as: POUYUEN M600 M500 M520i T300 Taiwan Baoyuan ELC-1000 series, The Taiwan new generation of SYNTEC system, The German PA system such as: typical Head League Higerman, Hanak HANUC, Guangzhou CNC GSK, open NC CNC system FAGORThe foreign system: Siemens, Spain Fage FAGOR