Product Details

Product Description

Product Application

Centrifuge is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings, placer and raw ore.
The Gold Concentrator retrieves pieces of fine gold from ore without having to use gold cyanidation, an expensive process that uses chemicals to extract gold from ore. The Gold Concentrator is a centrifuge device used primarily in gold mining.
The STL Centrifuge will separate any heavy material from any light material so long as there is sufficient difference in the densities of the individual particles in question. The Concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in Gold and Platinum. Other recovery uses include Mercury, Palladium, Tantalum, Copper, Silver and Diamond Indicator Minerals.

Structure

working principle

1. Fluidization water is introduced into the concentrate cone through a series of fluidization holes.
2. Feed slurry is then introduced through the stationery feed tube and into the concentrate cone. When the slurry reaches the bottom of the cone it is forced outward and up the cone wall under the influence
of centrifugal force.
3. The slurry fills each ring to capacity to create a concentrating bed. Compaction of the concentrating bed is prevented by fluidization process.
4. The flow of water that is injected into the rings is controlled to achieve optimum bed fluidization. High specific gravity particles are captured and retained in the concentrating cone.
5. Upon conclusion of the concentrate cycle, concentrates are flushed from the cone into the concentrate launder through port.

Charateristic

1. High concentrating ratio and high recovery
2. Total process automation, steady recovery performance
4. Environmentally friendly(requires no chemical additives or reagents)
5. Low water and electricity requirements
6. Low production costs, durable wear parts, minimal maintenances requirements
7. Compact design requiring less space, easy merged into the existing mining processing
8. Quick payback on investment, typically lass than half year
Rugged design and a high degree of quality manufacturing ensures that every Concentrator will provide many years of reliable, trouble-free operation in even the most severe operating environments.

technical parameters

Our Service

Our Company