Swaying feeder in Sudan new techonlogy
USD $1,000 - $10,000 /Set
Min.Order:1 Set
Yantai Jinpeng Mining Machinery Co., Ltd.
Vibrating mining feeder for ore transfer, customized mining feeder
Customized 6/8/24/32 point mining reagent feeder, NaCN reagent feeder
CNC mining reagent feeder, automatic reagent feeding control
Professional and customized swaying feeder for gold mining plant
Gold ore feeding swaying feeder, swaying feeder for crushing with best price
Yantai Jinpeng Mining Machinery CO., LTD
Professional mineral processing design, equipment production,installation and conmissioning institue.
Tel: 0086-535-3975290
Hot sell vibrating swaying feeder used for ore feeding
Swaying feeders are widely used in mining. In the mining line, swaying feeder is generally installed in front of the primary crusher. It can send the ore to crusher evenly and continuously.
Swaying feeder can effectively control the feeding capacity to match with the capacity of the whole crushing palnt.
Notes: The motor can be replaced by speed adjustment motor to adjust the feeding capacity according to the customers requirments.
1.body nnecting rod 3.gear reducer, 4.flexible coupling, 5.the motor
The device is generally installed in the hopper lower part of the discharge, the materials landed in the body. While working, the motor drives reducer through coupling, and through eccentric disk so that the equipment be placed back and forth movement, which is expected to complete the regulated feed. By adjusting the eccentric plate on the scale, the charge is adjustable.
Inlet mouth (L×W) (mm) | 400×400 | |
Eccentric journey (mm) | 0~170 | |
Swing numbers (nth/min) | 47 | |
Feeding particle max. (mm) | 35 | |
Capacity (t/h) | 12 | |
Motor | Model | Y90S-4 |
Power | 1.1kw | |
Rotation speed | 1400r/min |
Usually used in the following similiar process of gold,silver,copper, lead zinc, molybdenum and so on.
1, double-check equipment and hopper bolts fastening the mouth if there is loose.
2, check whether the ministries lubrication point is full of lubricating oil.
rolling bearing grease filling capacity of the cavity 2 / 3.
reducer injects within 30 # engine oil, the oil reaches worm gear tooth surface high degree of 1.5 times.
3, adjust the distance between flashboard to swing according to the feeding particle requirements.
4, when equipment is starting, the body does not allow too much of the material, it should be the normal operation of equipment before it can start feeding.
5, the first stop should be to stop feeding, the electrical motor can be closure after all the materials are discharged.
Provide ore dressing experiment,process design and onsite engineering service.
Welcome to visit our lab, design institute and factory!