Radio Wind Sensor
Feature
AC115-01 radio wind sensor works with TOMA tubular motor and radio control system to make the awning folded once the wind force reaches the pre-set level;
ABS plastic materials resisting ultraviolet ray;
Waterproof IP65 class, more suitable for outdoor usage.
Sensitivity stage from 1 to 9; 1 stage is the highest level;
Double pieces of 1.5V battery, lower watts loss with design patent.
Parameters
Installation and operation
Installation notice
TOMA products must be installed by professionals;
Please make sure the program of this sensor is compatible with other co-work products;
Please make sure its installation meets the local law and standard;
Please be noted that this sensor can not perfectly protect the awning in sudden weather, please make sure the awning is under tighten situation in this condition;
Any operation that is prohibited to TOMA operation is beyond guarantee range;
Along “OPEN” direction and open the cover box
1. Open back cover and magnet
Shell back cover magnet
Take out the inside cover
Install the battery
Note for wind sensor adjustment
Press KEY button and hold on, then install the battery, release the KEY button after saw the indicator light die out;
KEY sensitivity dial
4. Program
Program with TOMA radio receiver
Power on receiver
Enter into programming situation
Press KEY button for 3s
Motor shakes
Program complete
Program with TOMA radio motor
Press KEY button and hold on for 2s
After 3s
Power on radio motor
Motor has beeps
Release KEY button
Press KEY button again
Motor beep again
Program complete
5. Delete code
If you need to delete code, please refer to receiver or radio motor manual to complete!
6. Sensitivity adjustment
Please use screw driver to adjust sensitivity
Sensitivity dial
Every number on dial means sensor threshold; number 1 means the highest sensitivity value; number 9 means the lowest sensitivity value.
7. Assemble sensor
Correct
Wrong
Test the function of wind sensor by shaking it with hand.
Installation Note
Install the wind sensor in horizontal and upward direction;
The left and right end side is the best location for the sensor to detect the signal;
If the shaking range reaches its pre-set threshold, the sensor will automatically sent out an order to tighten the awning; and in the next 12 minutes the sensor will stop to detect the wind speed.
The sensor must be installed inside the
The sensor has an effective signal distance of 20m;
Please be noted that strong signal equipment such as the remote headphone will interfere the sensor’s normal running;
Left and right end of inside
The left
The right
Left and right end of outside
Horizontal and upward installation
Please do not upside down installation;
Please do not vertical installation;
Please do not tilt installation.
