Biodegradable resin/granule for film blowing
Code:CFZ-006 100%biodegradable and compostable. use directly
Code:BFZ-006 partial biodegradable 50%renewable content. use directly(recommend)
Code:BFM-006 partial biodegradable 50%renewable content. use undirectly
Code: BFM-007 partial biodegradable 60%renewable content. use undirectly
Resins technical data
ECOLO® CFZ-006 | |||
Testing Item | Standard | Unit | Result |
Appearance | / |
| Light yellow/ cylinder and round shape |
Density | GB/T1033.1-2008 | g/cm3 | 1.20 – 1.30 |
Moisture Content | Q/320583YHF001-2012 | % | ≤4.0 |
Melt Flow Rate | GB/T3682-2000 | g/10 min | 2 -5 |
Tensile strength | GB/T1040.3-2006 | MPa | ≥14 |
Breaking Elongation | GB/T1040.3-2006 | % | ≥350 |
Degradation rate in 180days | ASTM D6400/EN13432 | % | >90 |
ECOLO® BFZ-006 | |||
Testing Item | Standard | Unit | Result |
Appearance | / | / | Light Yellow/ cylinder and round shape |
Density | GB/T1033.1-2008 | g/ cm3 | 0.98-1.10 |
Moisture Content | Q/320583YHF001-2012 | % | ≤3.0 |
Melt Flow Index | GB/T3682-2000 | g/10 min | 1-2 |
Tensile strength | GB/T1040.3-2006 | MPa | ≥12 |
Breaking Elongation | GB/T1040.3-2006 | % | ≥250 |
Bio Substances Content | / | % | ≥38 |
ECOLO® BFM-006 | |||
Testing Item | Standard | Unit | Result |
Appearance | / | / | Light Yellow/ cylinder and round shape |
Density | GB/T1033.1-2008 | g/ cm3 | 1.10 – 1.20 |
Moisture Content | Q/320583YHF001-2012 | % | ≤1.2 |
Melt Flow Index | GB/T3682-2000 | g/10 min | 0 - 2 |
Tear strength | GB/T1040.3-2006 | MPa | ≥12* |
Elongation | GB1040.3-2006 | % | ≥200* |
Bio Substances Content | / | % | ≥50 |
The data for items with * mark refer to the finished film products of 30% master batch. | |||
ECOLO® BFM-007 | |||
Testing Item | Standard | Unit | Result |
Appearance | / | / | Light Yellow/ cylinder and round shape |
Density | GB/T1033.1-2008 | g/ cm3 | 1.15 – 1.25 |
Moisture Content | Q/320583YHF001-2012 | % | ≤1.0 |
Melt Flow Index | GB/T3682-2000 | g/10 min | 0 - 2 |
Tear strength | GB/T1040.3-2006 | MPa | ≥12* |
Elongation | GB1040.3-2006 | % | ≥200* |
Bio Substances Content | / | % | ≥58 |
The data for items with * mark refer to the finished film products of 25% master batch. | |||
Sepcification of biodegradable bags
T-shirt bag 100-320mm width
Rolling bag 100-470mm width
Flat bag: 50-800mm width
Drawstring bag, envelop bag,umbrella bag, patch handle,botton closure bag die-cut bag is available.
Factory view
Certificates
Accredited with QS,FDA,ASTMD6400 and EN3432
FAQ
1. Can the biodegradable corn starch material be made transparent or clear?
-- No. the natural color is creamy white.
2. What is the temperature resistance range of the product?
-- The temperature resistance can range from -15degree centigrade to 120 degree centigrade.
3. How long does it take your product to completely degrade?
-- It will depend on the thickness of the products. The thicker the product is, the longer decomposing process it takes.
4. Is corn starch product more expensive than paper or foam?
- Normally, it will be more expensive because the density is higher than paper and foam material. However, many city, state, and federal tax incentives are available that minimizes the cost increase. In many cases, it’s actually less expensive because of these green initiatives.
5. What are your MOQ and lead times?
-- MOQ is 1*20’GP. Sample leadtime is 3-5 days. Mass production lead time is 12-18 days after production mould is confirmed, it depends on the order quantity.
CONTACT PERSON: Yeny
Tel:0512-50353903
Skype:yenylee1