Waterproof Handheld Industrial PDA Terminal with UHF Reader / Barcode Scanner / Wireless
USD $458 - $698 /Piece
Min.Order:1 Piece
Shenzhen Sen-Rich Technology Co., Ltd.
handheld RFID UHF Reader Win CE 5.0 PDA with Bluetooth/WiFi/GPRS/Barcode Function Provide SDK
1D 2D Portable Management PDA, Barcode Scanner with Display,WinCE,Wifi,Bluetooth
Industrial Smart Handheld PDA Data Terminal with WinCE OS,Wireless,RFID,UHF
Industrial WinCE PDA with Wireless,RFID,UHF Reader,Bar Code Scanner,GPRS,GSM
Handheld Data PDA Terminal with Thermal Printer,Barcode Scanner,Bluetooth,WIFI,RFID,3G
Hardware description
CPU: Samsung S3C2440A,Clocked at 400MHZ
SDRAM memory(low-power MCP):64 Bytes SDRAM; 32bit data bus;SDRAM clock frequency up to 100MHZ
Flash Storage(low-power MCP): 128 Bytes SLC NandFlash
Operating System: Microsoft WinCE 5.0
Stereo: Dedicated low power audio codec chip ALC5620 High-performance stereo speaker output Stereo headphone output.
Screen:Support for Touch Input
240×320 ,65K Colors,3.2 inch QVGA Display panel
Keyboard:28 keys,4 side keys and F1/F2/F3/F4 function keys can be customize as self-define functionality.
User interface:USB, could switch to serial port,PSAM card slot,SIM card SD card Slot, Extensions IO(including 10PIN, TTL Comm).
RFID:Low-frequency : 125K
High-frequency: 13.56M, Support ISO1443A/B/15693,M1 Card,Desfire Card, CPU Card
UHF: 902-928M,ISO18000-6C(EPC?G2)or ISO-18000-6B PSAM card,Support PSAM9600,PSAM38400 baudrate
Barcode Reader:One-Dimensional Barcode Reader,Symbol SE955
Two-Dimensional Barcode Reader,Symbol SE4500
Camera(30W,300W Optional)
Wireless Communication:Wifi, Mavell, Standard High-Speed SPI Interface Bluetooth, Protocol Version 2.0 GPS Positioning GSM/GPRS(850,900,1800,1900MHz)SIM900D EVDO,CDMA2000 3G Network
Power Supply: build-in power management module, power by Li battery;3mA ultra-lower standby current;300mA charging current
Charging Circuit:USB Charging or 5V Adaptor
Software:pre-installed software and device drivers to meet the requirements of rapid development
PM-8001 IO Extended definition
Pins | Definition | Remark | Pins | Definition | Remark |
1 | VDD3.3 | Output | 6 | GND | Ground |
2 | MCU_TXD | Connected Internal MCU | 7 | USER_RXD | Connected external device |
3 | MCU_RXD | 8 | USER_TXD | ||
4 | GPB9 | External Control Pin | 9 | VBAT | Output |
5 | GND | Ground | 10 | VBAT | Output |
Figure 2-1-1 Figure 2-1-2 Figure 2-1-3
Steps of installing battery:
1) push rear cover lock to the unlock position(See Figure 2-1-1)
2) take off rear cover.(See Figure 2-1-2)
2) put in battery(See Figure 2-1-3)
3) lock rear cover
The device has two charging methods: use AC adapter or USB cable.
1) Plug the AC adapter into 220V AC Power Supply for Charging(See Figure 2-2-1)
2) Plug the USB Cable directly into the Computer’s USB port for Charging(See Figure 2-2-2)
Figure 2-2-1 Figure 2-2-2