EH-MD10 Bluetooth Smart Tracker CSR1010 Chip          

Description:

EH-MD10 Bluetooth low energy iBeacon with compact size 45mmx27mmx6.9mm.

When power on the beacon,it auto work as a iBeacon and always advertisement,it can be discovered and work as a Peripheral device.

1. Functional Overview

a. Support iBeacon

b. Support OTA(Over The Air) update the firmware

c. Support connect and configure the UUID,power,major,minor ID. See our "Beacon R&D Interface User Guide.pdf".

d. Support Security and proximity,with a beep

e. Low power energy

2. Power test

a. Advertisement:

    Interval: 200ms

    Current Pulse time: 4.72ms

    Max. current: 18.8mA

b. Idle current:<1 uA

3. Work condition

    Battery: CR2032 coin battery, can use about 2 years

    Temperature Range: 10F to 150F(-10C to +65C)

    Distance Range: 0-100m

4. Current support smart phones:

    IOS System:iPhone4S,iPhone5,iPhone5S,iPhone5C,iPad3,iPad4,iPod Touch5,the new iPad,iPad mini and the latest versions.

    Android System:Samsung Galaxy S3,S4,S4 mini,Note2,Note3 and the latest versions.

5. App Test

    iBeacon test can use the LocateIb in appstore.

    See our"Locate IB user guide.pdf".

APP Program Interface,

1.Introduction                              

This provides application development interface.The main reference document supply program development engineer.  It describes the interface to each service module, including services using characteristic values, characteristic values describing the properties of characteristic, etc.

1.1. Service UUID

1.1.1 0xF014ED15-0439-3000-E001-00000000FFFF: Eh-Beacon Beacon’s Configure UUID, this service is used for configure the Beacon’s  Advertisement data.  

1.1.2 0xF000FFC0-0415-4000-B000-000000000000: This Service is used for OAD, TI’s default service.

1.1.3 0x180A: This service can read the Beacon’s information ,include  firmware,software ,and hardware version. 

1.2. Characteristic UUID

1.2.1 In Configure Service, there are 5 Characteristics. And now, we just used 2 Characteristics.  

1.2.2 In OAD Service, There are 2 Characteristics. And used the TI’s OAD.

1.2.3In Information Service, can read all of the beacon’s  information.

2. Characteristic Description  

2.1. Characteristic 0xF014FFF1-0439-3000-E001-00000000FFFF This characteristic provide the chanel to configure the Beacon’s UUID. It have “write” and “read” property. When write this characteristic, the writed data will send to the Beacon. And the Beacon’s UUID had changed.  

Note:  The data lenth need 16 bytes. Data format must Hex.

Ex:  Write: 112233445566778899AABBCCDDEEFF. And the UUID of Beacon change to 0x11223344-5566-7788-99AA-BBCCDDEEFF00. 

2.2. Characteristic 0xF014FFF2-0439-3000-E001-00000000FFFF  This characteristic provide the chanel to configure the Beacon’s advertise data, like: Major ID, Minor ID, advertise interval and PowerRssi. It have “write” and “read” property. When write this characteristic, the writed data will send to the Beacon. And the Beacon’s advertise data had changed.

Data Format:  MMMMNNNNTTTTSS

MMMM: major ID

NNNNN: minor ID 

TTTT: advertise interval

SS: Power RSSI

Note:  The data lenth need 7 bytes. Data format must Hex.

Ex:  

Write: 000100020190C5.  

MajorID(MMMM): 0001  

MinorID(NNNN): 0002    

Interval(TTTT): 0x0190*0.625ms = 250ms  

RSSI(SS):  -59 db 

EH-MD10 Pictures:  

If you want easier development,you can consider order our evaluation kit,

EH-EVK-001 evaluation kit component description,

1. Connection Bluetooth module adapter

2. +3.3V Power supply  

3. Power on switch and Reset Button  

4.  virtual COM: Miro USB socket to power the board. And if USB to COM chip (label by 4) is mounted, it also acts as a virtual COM port (USB to COM, a driver for Windows is needed)..

5. USB power supply and USB Huber. 

6. Audio power circuits and audio output jack. 

7.  MIC Bias circuits and audio inpout jack. 

8. Button1 connation PIO and Button 2

9. LED Display(RED,BLUE,YELLOW)

10. Mount place for Apple’s Authentication Coprocessor: 2.0B+2.0C

EH-EVK-001 evaluation kit base board,

EH-EVK-001 for EH-MA41 Bluetooth 2.1+EDR Data Module,

EH-EVK-001 for EH-MB05 Bluetooth 2.1+EDR Audio Module,

EH-EVK-MC10-002 for EH-MC10 Bluetooth 4.0 Data Module,

1.Sample packed in small bag or tray,within 7 days for sample delivery.

2.Bulk order packed in ESD tray,70pcs each tray,21 days for bulk order delivery.

1.Can accept sample orders to test our quality at first.

2.Can offer technical support during cusomer's developmen.

3.Can offer firmware customize service.

4.Offer 1 year factory warranty.  

For more information,please feel free to send us inquiry with your application requirements,we will reply you soon with our bluetooth module product data sheet and control interface user guide,thanks for your time!