YTC oil drum carrier

1.feed securing strap through loops provided behind drum and tension firmly.

2.sp 200 drum in position can then be wheeled to the area of decanting

3/4" bsb breather tube to 3/4' opening.

4. the 2" opening is available for the user to fit a tap suitable for the viscosity of the fluid contained in    the drum

5. lock the rear castors to ensure the cradle does not shift during the decanting process.

6. sp200 is now ready for use either by manual control or locked down for use with tap.

7. safety shaft should be used to secure cradle in near vertical position when the unit is unattended.

8. to load, lift the drum vertically to a height above the cradle base with a lifting mechanism sush as       SP Multi

9.lifter, the SPMulti lifter can be used on open and closed drums.

10. push the frame with cradle under the container.

11. lower the contaier into position making sure that 2" bung

12. hole will be in the front lower position

product show: