Product Details

Product Description

Technical Parameters

1. Below are the technical parameters of our Wall Panel Machine:

Specification	Thickness	Length(mm)	Width(mm)	Weight(kg/m²)	Error Allowance (kg/m)	Sound insulation	Fire resistance
75 series	75mm	2440-3000	600-610	50± 5	Length± 5 Width± 2 Thickness± 1 Flatness± 1	40dB	2.5h
90 series	90mm			55± 5		42dB	≥2.5h
120 series	120mm			67± 5		44dB	≥3h
150 series	150mm			85± 5		46dB	≥4h
Customization available according to the customers' need.

2. Raw material proportion for the Wall Panel:

Items	50mm/m2	75mm/m2	90mm/m2	120mm/m2	150mm/m2
Cement	11.5kg	20kg	24.9kg	34.9kg	44.98kg
Fly ash	5.7-6.9kg	10-12 kg	12.3-14.9kg	17.2-20.9kg	22.1-26.98kg
Foam agent	0.003kg	0.005kg	0.006kg	0.008kg	0.01kg
EPS grain	0.35-0.4kg	0.6-0.7kg	0.75-0.88kg	1.05-1.23kg	1.36-1.59kg
Two-sided Board	8 KG (based on fiber cement board)
TOTAL	25.5-26.8kg	38.6-40.7 kg	45.9-48.7kg	61.2-65kg	76.4-81.5kg

Features of Production Line

1. The source of the production raw materials iswidely with no regional restriction. The product is made of sawdust, straw(rice hulls), many kinds of crop straw and inorganic material(such as talcum powder, infusorial earch and powder, infusorial earth and powder coal ash)after special technology. So this project have low production cost, small investment and fast effectiveness.

2. The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes(waste water, waste gas and waste residue)during production.

3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.

4. The machine can produce thickness for 60mm, 90mm, 120mm, 150mm and 180mm, etc., all the length within 3m and width for 500-1000mm wallboard can be produced.

Exhibition