Specifications

AAC conductor
1. ISO9001, ISO14001, CCC
2.one of China's biggest cable manufactory

1. The applications of AAC conductor/All Aluminum Stranded Bare Conductor

Conductor(AAC and ACSR) have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

2. AAC conductor/All Aluminum Stranded Bare Conductor 's Service Performance

(1). The permissible long-time operating temperature for aerial conductor is 70oC.
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

3. The Performance about AAC conductor/All Aluminum Stranded Bare Conductor

(1). The electrical performance of AAC and ACSR is indicated in DCΩ/km(20oC). The resistivity of the hard aluminum wire for Strandeded wires is not greater than 28.264 nΩ. m of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
a. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. tensile strength of corresponding size specified in the standard for aluminum wire.

b. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

4. AAC conductor/All Aluminum Stranded Bare Conductor ‘s Material Standard

(1). The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889: 1987).
(2). The zinc coated steel wire used for ACSR conforms to IEC 60888: 1987.
(3). Production can be arranged according to customers requirements for material standard, etc.

5. The following tables showing the properties of AAC conductor/All Aluminum Stranded Bare Conductor

5.The following tables showing the properties of AAC conductor/All Aluminum Stranded Bare Conductor

Nominal area (sqmm)	Stranded and Wire diameter	Calculated Section Area	Approx. Overall Diameter	D.C. Resistance Not Exceed(Ohm/KM)	Calculated breaking load(kg/km)	Calculated weight(kg/km)	Delivery length (meter)
16	7/1.70	15.89	5.10	1.802	2840	43.5	4000
50	7/3.00	49.48	9.00	0.5786	7930	135.5	1500
120	19/2.85	121.21	14.25	0.2373	19420	333.5	1500
400	37/3.70	397.83	25.90	0.07247	61150	1097	1000

Place of Origin	Henan, China
Brand Name	Huawei
Model Number	stranded
Insulation Material	Other, alloy aluminium
Type	High Voltage
Application	Other, overhead
Conductor Material	Aluminum
Jacket	Other, no

AAC conductor

Product Features

Specifications

You May Like

Popular Searches

Find Similar Products By Category

You May Like