Blow moulding machine, buy 5 gallon PC water barrel blow moulding machine on China Suppliers Mobile

Product Details

5 gallon PC water barrel blow moulding machine

Product Description

PC 5 gallon water barrel blow mold machine
1, full automatic with robot hand
2, from pc granule to bottle
3, max volume:5gallon
4, material: Food grade PC granule
5, apply: 5 gallon PC barrel
6, certificate: ISO9001,CE

This 5 gallon PC water barrel blow moulding machine is the ideal machine for making 5 gallon PC Water Barrel.

Clamping System---------Fixed Mold Open-Close system
Extrusion System--------Hard Gear Surface Gearbox and Imported Inverter (Japan Brand)
Die system--------------Accumlator type die head
Hydraulic System--------Imported hydraulic valve, Imported seals and Eletricity-Liquid proportional control
Control System----------Janpan PLC, Imported HMI and PLC automatic temperature control

Extrusion blow molding machine features:
1. The screw adopts high potency melt to make sure the material well mixed.
2. Adopt frequency control of motor system to reduce the power consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
7. Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable weight and reduces production cycle.
9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the product automatically.

Machine parameter:

unit	item	specification	discription
Extruding (Main extruding)	Screw diameter	φ82mm	Special exhaust screw for PC
	Screw L/D	38:1
	Material of screw and barrel		38CrMoALA, hardened by nitriding treatment
	Plasticizing capacity	160KG/Hr	Based on HDPE 5502, changeable with different density of material
	Extruding method	Oil motor	Low speed, big pitch of strand
	Front-back adjusting	Yes
	Up-down adjusting	Yes	Chain and turbine running with oil motor
	Temperature control zones	8	Temperature medule from Mitsubishi
	Blowers	4	Power 120W
	Cooling	Yes	Put cooling water through entrance of screw
Mold closing unit	Structure		Without bar, bilateral synchronization center-mold closing, with large and average clamping force
	Mold-moving guide	Ball bearing beeline guide	Small resistance, high speed, high precision, scuff resistance
	Platen dimension	550×650 mm	Max.
	Platen distance	350~780mm
	Clamping force	215KN
	Fixing mold	Mold pressing platen	Make screw hole on platen, mold pressing platen
	Clamping stroke control	Inductive switch & moving	Discriminate end of mold opening, low-speed of mold opening, end of mold closing and low-speed of mold closing
	Electric protect		Taiwan FOTEK electric protect switch with six-zone
Diehead	Structure	Centre-feed	Average press, be able to oppugn
	Material		38CrMoALA inner mirror, nitriding treatment
	Accumulator	4L
	Die mouth	Φ80~Φ120 mm	Min~Max
	Parison thickness controlling	Available	MOOG 100-point
	Injecting stroke conmtrol		Accumulator electric ruler & limit switch
	Parison adjustment method	Outer mandral