HVDC motor, buy dc motor with 230VAC FULL WAVE RECTIFYING, high torque motor,high rpm electrical motor,used for mixers on China Suppliers Mobile

Product Details

DC Motor with 230VAC Full Wave Rectifing,

1. Products' Advantages

     1)high torque motor,high rpm electrical motor,used for mixers Paper shredder Power brush motor,
Vending machine motor
    2) Weight: Approx.210g
    3) ISO/Ts16949 certified company

Note:

All listed models are of avaliable designs and we can provide customized designs.

2. FS-5512A Series' Performances

Model No.	Main Performance
	Rated Voltage	No Load		At Maximum Efficiency					At Stall
	Rated Voltage	Speed	Current	Speed	Current	Torque	Output	Eff.	Current	Torque
	V	r/min	A	r/min	A	g.cm	W	%	A	g.cm
FS-5512SA-08215	240 VAC*	13000	0.07	10000	0.18	300	30.8	71.3	0.55	1290
FS-5512SA-10112	120 VAC*	12800	0.1	10100	0.32	200	20.7	53.9	1.15	950
FS-5512SA-11136R	120 VAC*	11300	0.11	8814	0.29	226.5	20.4	65.7	1.02	1025
FS-5512SA-12112	120 VAC*	12500	0.1	10200	0.28	200	20.9	63	1.08	1080
FS-5512SA-09240R	220 VAC*	11600	0.05	9471	0.24	440	42.9	64.8	1.05	2400
FS-5512SH-08215R	240 VAC*	13000	0.07	1000	0.18	300	30.8	71.3	0.55	1290
FS-5516SHFC2-12190RL	230 VAC*	27000	0.21	22600	0.5				2.87	255

*: AC full wave rectifying

Unit Conversion: 1g.cm≈0.098mN.m≈0.014oz.in 1mm=0.039in 1g=0.035oz

3. Mechanical Drawing

Paper shredder HVDC motor
Power brush Dc motor
Dimension: φ 37.8 x 31.5 Thk. x 65.5 L. shaft O.D. 4.0mm
Basic Structure: SECD housing / Plastic end cap
Application: Paper shredder / Power brush
Weight: Approx. 210g

4. A Brief Introduction of Chengfang Motors

Basic Structure of Chengfang Motors

Customized Options

·2-pole stator
·Sr ferrite permanent magnet
·3, 5, 7, 8, 9, 12,16 slots armature
·Silicon-steel lamination with epoxy coating
·High-carbon steel shaft
·Cu-Ag alloy commutator
·Copper-graphite brushes
·Be-Cu leaf-brush commutating system
·SECD round / flat type housing
·SECD end cap / glassfiber reinforced PA6/6 end cap
·Cylinder / self-aligning Cu-Fe alloy sintered bushes
·155oC (class F) magnet wire

·Leadwires with connector / pins
·EMI suppression components
·PTC or thermostate protection
·Built-in AC/DC rectifier
·Built-in cooling fan
·Multiple output shaft
·diamond knurls, straight knurls, D-cut, stepped shaft
·Shaft-mounted gears, eccentric gears, belt pulleys
·Stainless steel (SS304, SS420) shaft
·Ball bearing
·Cage-brush commutating system
·Precious metal brush / commutator
·Hall encoder
·Low-cogging torque design
·180oC (class H), 200oC (class C) magnet wire
·-40oC ~ 220oC bearing lubricant
·Neodymium magnets