Common Rail Test Bench From Best Supplier Taian Taishan JInshi
Negotiable /Set
Min.Order:1 Set
Taian Taishan Jinshi Machine Co., Ltd.
2015 Common Rail Test Bench From Best Supplier Taian Taishan JInshi
CRSS-C common rail injector test bench is suitable for Bosch, Denso, Delphi and Siemens etc. (the CP1 /CP2 /CP3/ HP3 /HP4 / DELPHI)
Products feature
1. Test the high-pressure injection performance of common rail pump.
2. Test low-pressure transfer pumps performance of common rail pump.
3. Test fuel rail pressure sensor performance.
4. Test fuel rail limited pressure relief valve performance.
5. Test fuel rail flux limit device performance.
6. Measurement of the fuel delivery of common-rail injector.
7. Measurement of the reflux delivery of common-rail fuel injector.
8. Test the measurement consistency of common rail injector.
9. Test the degree of atomization of common rail injector.
10. Test the sealing of common rail injector.
11. Motor soft start, frequency-changing and speed-regulation.
12. The oil rail pressure can be set.
13. At the same time drives the work of six injectors.
14. LCD display the testing oil rail pressure in real-time.
15. Various language available, such as Chinese, English.
16. Pulse and freqency of the injector drive signal can be adjusted.
17. The testing of open-loop and close-loop can be controlled from controller.
18. Provide safety protection design, use more safety.
19. There are the database of common rail fuel pump and injector.
The main technical parameters
Model | CRSS-A, CRSS-C |
Rotating speed range of main shaft (rpm) | 0~3000 |
Rotation direction of main shaft | Positive, negative |
Testable cylinders of injection pump | 4 |
Maximum output power (kw) | 11 |
Fuel supply pressure of common rail (Mpa) | 0~160 |
Oil measuring frequency | 0~1000 |
Capacity of fuel tank (L) | 42 |
Pulse Width set: (MS) | 0~-3000 |
Pressure control (PID) | Open loop /close loop |
Power of inverter (kw) | 11 |
Controlling temperature of fuel (°C) | 40±2 |
Power of main motor (kw) | 11 |
Overall dimension | 1900*800*1500 |
Weight (kg) | 850 |
Founded in 1966 - the Taian Taishan Jinshi Machine Co., Ltd(the primary Taian Experimental Equipment Factory) is a member of the gas engine industry union and a Chinese automobile servicing equipment league syndic unit, a nozzle and injection pump industry syndic unit. Year to year provides injection pump technology training. It is the largest special manufactory producing fuel pump system test bench.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~