MULTI-PURPOSES SPRAY POLYURETHANE FOAM/PU FOAM

JUHUAN one component spray polyurethane foam/pu foam is uesd preferable for insulation and insrallation,such as bonding ,sound and heat insulation,sealing,filling up crack and gap.

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

PRODUCT FEATURE

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

 Patented product ---------- gun straw dual use spray polyurethane foam /pu foam

The advantages of gun-straw dual use spray PU foam

1.    For users: More flexible, more efficient.

Depend on different projects and requirements, such as gap’s size, foaming output, linear meter etc, it can exchange with gun and straw, which makes builders more efficient. Meanwhile, it can avoid waste and saving the cost and time.

2.    For distributor: Minimize stock.

Only stock up gun-straw dual use spray PU foam instead of gun type and straw type. Also it can reduce the financial pressure, fasten velocity of product (the shorter velocity is, quality would be better)

3.    Precise order: It would not happen that the factory made gun type instead of straw type or similarly on the contrary.

4.    Reduce the damage: As we all known, bonnet of straw type PU foam is apt to be damaged during transport, if one damaged, it will cause the damage to the total carton. Bonnet of gun-straw dual purpose PU foam adopt gun type bonnet, so it can reduce the loss in transport and storage.

5.    No need to change use habits and more humanized. Usage of our patent product has no difference with traditional product.

JUHUAN Company has committed to the product which is more suitable for the market and customers. In order to better product, we hope distributors and customers boycott fade goods together. This product has been applied for national patent, and counterfeit will be sued.

Application No.: ZL2013 2 0475292.2

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

Usage of  foam spray gun supplier

1.    Shake can thoroughly for at least one minute.

2.    Clean and moisten surfaces with a water sprayer prior to application

3.    Place the can upside down, firmly screw can on adapter and turn the flow adjustment screw anticlockwise;

4.    Fill holes and cavities approximately 50% from bottom to top.

5.    Foam begins to cure after 10 minutes. Further processing should be done an hour later.

6.    Use knife to smooth out the cured foam and treat surface with cement, paint or silicone

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

Security Advisories OF   foam spray gun supplier

l  Keep the can away from children

l  Faraway from fire and prohibition of being close to inflammables and explosives

l  Continuous air circulation is required because of inflammable gaswhich is produced when working. Worker should wear gloves and goggles

l  Avoid direct sun, Stored in a cool, ventilated, dry place, temperature is below +50°C

l  Always keep surface out of lipid, oil and dust

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

LOW PRICE  SPRAY POLYURETHANE FOAM/PU FOAM /POLYURETHANE FOAM FROM CHINA SUPPLIER

Certificate

Shandong JUHUAN new material technology Co.,Ltd ( hereinafter referred as to Shandong JUHUAN) is the key investment project of the National Economic and Technological Development Zone of Linyi government. Shandong JUHUAN is a construction adhesive company specialized in technology development and manufacturing. Our main product is spray polyurethane foam, silicone sealant, contact adhesive, marble adhesive, building anchorage glue, epoxy resin AB glue, liquid nails etc. Since 2012, the sale of spray polyurethane foam has been top 2 in China, and the order of 2016 is expected to be TOP 1.Shandong JUHUAN covers an area of 67000 square meters and investment of first period is 300 million RMB, which aims to eight production line of spray polyurethane and four production line of can. After the project being put into production, its annual output will be 1 billion RMB and taxes are up to 100 million RMB. The sales and service outlets spreads all over the country. Shandong JUHUAN sticks to the concept of “Quality First, Credit Uppermost”, and insists on improving product quality, perfecting product range and meeting the needs of market. High quality, reasonable price and superior service attract the customer and agent from all over the world.