Product Details

crystal microdermabrasion machine

Product Description

General introduction( portable crystal peeling machine )

crystal microdermabrasion machine

SPA Skin crystal peeling beauty machine completely changed the traditional way, which is hand-cleaning skin relying on individual's practice skills, SPA Skin beauty machine, using vacuum suction mode controlled by intelligent process, Through the combination of products and equipment, deep cleaning the skin and pores off horny, acne, blackheads and other impurities in very short period of time. And improve the deep absorption of nutrition products, promote pores tightening, smooth skin, increase skin moisture, and make your skin whitening, moisturizing and good texture.

crystal microdermabrasion machine

Functions of ( portable crystal peeling machine )

1.Crystal dermabrasion

Crystal Microdermabrasion: a procedure that uses fine crystals and a controlled vacuum to exfoliate the skin. After the treatment, the skin has improved texture and softness, as well as fewer imperfections such as wrinkles and acne scars. The skin is washed to remove excess oil and dirt. Then, a stream of aluminum oxide crystals is targeted over the area. The crystals abrade away old, dead skin cells, which the vacuum then picks up with gentle suction. This promotes the growth of collagen and new, rejuvenated skin. Moisturizers and sun block are then applied to the treated area.

2.Diamond dermabrasion

The diamond microdermabrasion (crystal-free) system replaces the micro-crystal flow with a diamond tip wand. Areas closer to the eyes and mouth can be abraded more accurately with diamond abrasion - no risk of stray crystals. Provides a Non-Surgical skin resurfacing procedure by using sterile diamond heads to peel and rub off the dead cells at the top skin layer followed by vacuuming/suction removing particles along with any dirt and dead skin. This procedure removes skin debris, scars, blemishes, wrinkles and uneven pigmentation of the skin. Moderate usage of diamond dermabrasion accompanied with skin products that penetrate through the top skin layer and reach the dermis level help to replenish natural nutrients and restore cell activity promoting healthy skin.

crystal microdermabrasion machine

Feature ( portable crystal peeling machine )

1.Non-invasive physical scrub rejuvenation technology

2.strong vacuum suction for clean the dirty or dead skin

3.Great deep cleaning function and make the skin more young .

crystal microdermabrasion machine

Process and effect ( portable crystal peeling machine )

1, Cleaning: Deep cleaning,clear skin stratum orneum,minimally invasive scar,clearing blackhead.

2, Washing:Deep cleaning dirt,clean skin.

3, Moisturizing:supply sufficient water molecules to skin while cleaning.

4, Repair:Improve dull skin,shrink pores,smooth skin,repair skin cells.

diamond microdermabrasion machine

crystal microdermabrasion machine

Company Information

Guangzhou Ibeauty Electronic Technology Co., Ltd is one of the leading one-stop beauty haven offering advanced solutions, for the most diverse beauty equipment needs. Our products designs are unique, equipped with the latest beauty technologies and techniques from Korea and Japan.

Our advance technology beauty equipments cover both face and body slimming beauty equipments. Various working theories are available, such as IPL, Radio Frequency, Vacuum, Infrared, Ultrasonic Liposuction, Bio-current Slimming and etc. After years of researching and improvement, our beauty equipments have been recognized and can be seen in most of the province in China. We also exported our items to Europe, North and South America, Southeast Asia and Middle East.

Our manufacturing factory in Nanhai Industry Park, has Electronic Engineer Department, Program Design Department, Electronic Technology Department, Testing Department, and Production Department, along with dozens of electronic engineers, electronic circuit designers, software and data engineers, beauty equipment manufacturing experts, and electronic equipment technical designers.

These departments are our strongest support in our beauty equipments development and quality.

We have attained ISO9001 certification, and most of our products have CE, CCC, CQC, and GS certified. We have 15 production lines which can roll out 1000-3000 sets of products monthly.

At the moment, we have 250 models for your selection, adding 2-5 new items each month.

The ODM and OEM services are our strongest advantage.

OUR PRINCIPLES:
We are dedicated to working together as a team through ethics and integrity. We encourage our people to create, to inibeautyte, to be entrepreneurs and to strive for the best, always.
1. Provide our buyers with pioneering beauty equipments of the highest quality.
2.Deliver outstanding service by treating each individual as we ourselves would like to be treated.
3.Build partnerships with our suppliers, retailers and colleagues based on fairness and trust.
4.Enhance our reputation of image, style and prestige.
5.Pursue profit, but never at the expense of quality, service or reputation.

WE ARE COMMITTED TO EXCELLENCE :

To ensure the long-term success of our Company, we provide high class products and services our best quality into all our day-to-day business activities. Our workplace culture fosters a unique spirit of teamwork, inibeautytion, passion and a shared mission of Giving the People the Opportunity to Be Beautiful.

Certification:

Detailed imgages of company:

Company picture:

Office:

Research&development center:

Factory pictures:

Our Services

We will guarantee the quality of our equipment, normally there is no quality problem

1. If there is a deficiency, please email or call us on the reasons, it would be best if this can be dealt with by email or telephone. Because some the problems are caused by using the machine in wrong way.

our company for repair by ordinary post, or we could re-send a new one to our client. If the cost of posting the problematic device back to us is more than the value of a new device, we would take it into consideration, according to the actual status; apply to re-send a completely new device back to our client.

2. We suggest the client to take photos of the area where the problem occurs, we will pass them to our technician , our technician will give a satisfactory answer within 1-7 working days

3. If the problem comes from the spare part, we could consider in changing the spare part for our client, which could be sent with his/her next order. If the next order is uncertain, we could pay freight cost to send the spare parts.

4. If the problem comes from the main device, we could advice our client to post the device back to our company for repair by ordinary post, or we re-send a new one to our client. If the cost of posting the problematic device back to us is more than the value of a new device, we would take it into consideration, according to the actual status; apply to re-send a completely new device back to our client.

5. Please make sure, if send the inferior one to us by air any advanced notice, ibeauty will not pay relevant air freight and custom order

6. CE certificate can gurantee the machine quality.

7. User manual or operating video will instruct how to use the machine.

8. Proper packing is suitable for long way transportation.

9. Delivery Date:3-7 days.

10. Warranty:Host machine for 1 year,FREE accessories for 3 months.

FAQ

1. Do you have any warranty?

Yes, we have. Three years warranty on host machine is given. Six months free replacement warranty for handles, treatment heads, and parts.

2. How is your after-sale service?

We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, webcam, online chat (Google talk, Facebook, Skype). Please contact us once the machine has any problem. Best service will be offered.

3. What certification do you have?

All of our machines have the CE certification which ensures the quality and safety. Our machines are under strict quality management to ensure good quality. Because we fully understand that it will be a great trouble if machine have any problem during working at oversea.

4. Will you teach how to use the machine?

Yes, we can provide a complete user manual and usage video for instruction and application. And 24/7 online consultant service ensure you whatever problem and whenever you meet, you can solve easily. It is easy to operate by anyone with the instructions.

5. How about the shipment?

The machine will be shipped within 2-3 days after the receipt of your payment.

6. How does your factory do regarding quality control ?

We have a strictly quality inspection department. Our engineers will carefully check and test the machines many times before we deliver them to you. To make sure you can get the high quality machines, only the machines that have passed the strict quality inspection can be delivered to you.

7. Do you offer OEM and ODM services?

Yes, we can offer you better OEM and ODM services. We have our own R&D department with 38 experienced designers and engineers and many production lines , so we have the great capacity to offer you high quality beauty machines according to your needs, ideas and samples.

8. How's your after-sales service?

We have a professional technical team. If there is any problems occur, you just need to contact us by email, telephone or on-line chat. Then we will help you slove the problems immediately.

9 .Why should you choose us?

1)Powerful factory, giving the competitive price and best technology support

2)12-years’ experience in producing beauty machine, strong R&D

3)3 years-warranty and 7x24 online after-sale service

4)CE Certification, the key for you to legally use and sell the machine

5)Diversity of customized service, strong OEM capability available

10. Are you a factory or just a trading company?

We are thte real professional beauty machines manufacturer,which has a toal staff of 210 and possesses our own factory with an area of 4500 square meters. You create market, we do production for you !

Packaging & Shipping

T12, microdermabrasion

Packing: Carton box

Shipping: :1.Door to Door By DHL,UPS,TNT,EMS,FEDEX
                    2.By Airway
                   3.By Sea
                   4.You can have your own forwarder!

Purchasing process

Acknowledgement

Dear Sir/Madam:

Thanks for visting our prducts.We are the beauty machine manufacturer. We have cooperated with many companies from American ,Turkeys, Spain,Russia, Japan and south america and so on.

This machine can protect the skin from hurting and smooth the skin. And it can be effective in the therapy of skin refuvenation, removal of deep wrinkle, pigment and acne.

(fat loss, shape body)

And meanwhile, we provide OEM service,that includes change the description as your request.

We are looking for worldwide distributors to establish long-term cooperation relations, if you have a dream, if you want to join the beauty equipment industry, so, please don't hesitate, please contact us immediately, high quality machine will bring you a brilliant market benefit!!

Any comments will be appreciated.

With bsest regards,

Christina

Card

	Christina ibeauty
	Guangzhou Ibeauty Electronic Technology Co., Limited
	T: 86 20 23318124 \| \|86-13422114097 Skype:ibeauty.christina Alibaba:cn1511219778
	QQ:1293794021
	W:
	Products Showroom on