Specifications
Tungsten Drawing Dies With Recycling Raw Material1Produce relatived products with good quality
2OEM&ODM
3ISO900
Tungsten Drawing Dies With Recycling Raw Material
Specification
1.Professionl manufacturer for tungsten carbide items with more than 12 years
2.ISO 9001-2008 Quality Control System
3.OEM, ODM project accepted
4.Quality assurance and after-sale service
Tungsten Drawing Dies With Recycling Raw Material
Main Grade
CS05(YLO.5),CG20(YL20),CG40(YL30);K10,ZK20/ZK30
Advantage
Tungsten carbide mold’s service life is ten times than steel die. And Tungsten Drawing Dies With Recycling Raw Material is of high hardness, high strength, corrosion resistance, high temperature and small expansion coefficient
Pictures
Drawings
Grade information
Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPa) | Applications recommended |
YG6X | 14.95 | 91.5 | 1800 | For drawing steel and nonferrous wires or bars of less than diameter 6.00mm under not so much stress. |
YG6 | 14.95 | 90.5 | 1900 | For drawing steel, nonferrous alloy bars of less than diameter20.00mm under more stress and also for drawing tubes of less than diameter 10.00mm. |
YG8 | 14.8 | 89.5 | 2200 | For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts. |
YG10 | 14.5 | 88.5 | 2400 | |
YG15 | 14.0 | 87.0 | 2800 | For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting. |
Catalogue
Zhuzhou Tongda Cemented Carbide Works
Brief Introduction
Zhuzhou TongDa Cemented Carbide Works specialize in the production of bespoke Tungsten Carbide Hard Metal Wear Resistant Products for use across a wide range of industrial applications in both the as-sintered and finished ground condition.
Established in 2001 Zhuzhou TongDa Cemented Carbide Works are offering customers recommendations and solutions for individual wear resistant components and special tooling requirements.
Zhuzhou TongDa Cemented Carbide Works produce an extensive range of tungsten carbide grades in-house including the popular ISO application grades of K10, K20, K30, K40, P10, P20 & P30/40 as well as numerous special Cobalt and also Nickel binder tungsten carbide grades for use in corrosive resistant applications.
Material compositions including submicron, medium and coarse grain grades are available and can be supplied in cylindrical and flat section in both the as-sintered and finished ground condition.
The tungsten carbide grade powders are processed in-house using quality raw materials to ensure a high product quality is maintained. Individual items and volume production components can be produced by either pre-shaping or automatic press tooling.
Inhouse facilities include a comprehensive grinding shop plus EDM wire cutting and spark erosion as well as the capacity to offer tungsten carbide components mechanically retained into premachined steel housings and casings by interference fitting, induction & gas brazing or using adhesive bonding.
Production Process
Certificate
Payment and Shippment Way
PRODUCTS RANGE
l Rods & Endmill
l Stripes & Plates
l cutting tools
l Ring & Roller
l Solutions for Polyolefins Industry
l Application in Coating Industry
l Wear parts of Concrete Pump
l Products for mining industry
l Other Customized Items
l Tungsten Heavy Alloy
Welcome to contact us for detailed information
Jana Wu
Sales Executive
TEL:0086-731-28164567
FAX: 0086-731-28161234
Website:
ADD: Xintangpo,Middle Hongqi Road, Hetang District, Zhuzhou City, Hunan Province, China