Harvest’s “W-series” Steel Fibre Product Data Sheet

W-310/30/.40HE

Harvest’s “W-series” fibres are cold drawn wire fibres for refractories materials for the high temperature processing industries (Metallurgy, petrochemical, cement, glass, power station and other furnaces).

Chemical Analysis (%):

*Other materials :430/304/330/316…& low carbon steel  can be manufactured specifically to suit customer’s requirements.

Service Temperature:

Dimensions: 

• Lengths are 6/10/15/25/30/50/60mm. Other lengths can be manufactured specifically to suit customer’s requirements.

• Equivalent diameter 0.2/0.4/0.5/0.6/0.75/1.0mm. Other diameters can be manufactured specifically to suit customer’s requirements.

Packing: 

• Fibres are packed in 1/5/10/20kg cartons then put on pallets. Other packaging can be supplied if requested.

Using method and using quantity: 

• Usually use 0.2-2% ( volume ) of steel fiber in refractories or concrete materials, mixed evenly to maximize the use effect of steel fiber into full play. Mix method :1. Wet mix; 2. Dry mix.
• In order to prevent  explosions & radiation for concrete buildings , it is recommended to use steel fibres number 40-60% (volume).

Health & Safety:

• USING STEEL FIBRES UNDER NORMAL CONDITIONS DOES NOT PRESENT AN INHALATION, INGESTION OR CONTACT HEALTH HAZARD.
  
  

• BECAUSE OF THEIR PHYSICAL NATURE, WE RECOMMEND THAT OPERATIVES HANDLING THE FIBRES SHOULD ALWAYS WEAR GLOVES.
  
  

• TO AVOID DETERIORATION OF PACKING, THE FIBRES SHOULD BE STORED IN A DRY ENVIRONMENT.

.