Specifications

bentonite mill, Size of final product can be 0.613mm (30mesh) -0.033mm (425mesh). Some can reach the fineness of 0.013mm

bentonite mill, bentonite grinder - High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc.

Characteristics:

1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
4. The separator can be adjusted very easily.
5. The multi-class seals are adopted to keep the grinding equipment tightly closed.

Technical data:

 

Model	Piece of roller	Size of the roller (mm)	Size of the ring (mm)	Feed size(mm)	Fineness of powder (mm)	Capacity (t/h)	Motor power (kW)	Weight (without motor)(t)
YGM65	3	Φ210×150	Φ650×150	≤15	0.033-0.613	0.4-1.8	15	3.6
YGM75	3	Φ260×150	Φ780×150	≤15	0.033-0.613	1-3	18.5	4.8
YGM85	3	Φ270×150	Φ830×150	≤20	0.033-0.613	1.2-4	22	8
YGM95	4	Φ310×170	Φ950×170	≤25	0.033-0.613	2.1-5.6	37	14
YGM130	5	Φ410×210	Φ1280×210	≤30	0.033-0.613	2.5-9.5	75	24

Notice: Any change of High Pressure Suspension Mill technical data shall not be advised additionally.