SWITCH, buy CISCO WS-X6704-10GE= on China Suppliers Mobile

Product Details

PRODUCT OVERVIEW

The Cisco Catalyst 6500 Series has an 8-port 10 Gigabit Ethernet module and a 4-port 10 Gigabit Ethernet module. These modules support pluggable optics to support distances up to 80km over single-mode fiber, 300m over multimode fiber, and 15m over copper. The 8-port 10 Gigabit Ethernet module provides up to 64 10 Gigabit Ethernet ports in a single Catalyst 6500 chassis, ideal for deployment in the aggregation layer of LAN campus and data centers. Both modules are interoperable with the Cisco Catalyst 6500 Series Supervisor Engine 720 and provide 40 Gbps connection to the switch fabric. Building upon the award-winning Catalyst 6500 Series, these 10 Gigabit Ethernet modules are backward compatible with all existing Catalyst 6500 line cards and services modules, enabling service providers and enterprises to offer new Layer 2 through 7 services and network capabilities to increase revenue and user productivity without complete equipment upgrades.

The Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules are designed for deployment in the distribution and core of campus and data center for traffic aggregation or for interbuilding, points of presence (POPs), WAN edge, and MAN connections. These modules support IEEE 802.3ad link aggregation and Cisco EtherChannel ® technology for fault-tolerant connectivity and bandwidth scalability of up to 80 Gbps per EtherChannel connection. In addition, they support hardware based quality of service (QoS), access control lists (ACLs), and jumbo frames to enable secure and predictable performance for bandwidth-intensive applications.

Product Specifications

Standard protocols	IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, and IEEE 802.3ak
Physical specifications	Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 chassis Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) Weight: • WS-X6708-10G-3C: 13 pounds • WS-X6708-10G-3CXL: 13 pounds • WS-X6704-10GE with DFC3BXL: 10 pounds • WS-X6704-10GE with DFC3B: 9.8 pounds • WS-X6704-10GE with CFC: 9 pounds
Environmental conditions	Operating temperature: Certified for operation: 32° to 104°F (0° to 40°C) Design and tested for operation 32° to 130°F (0 to 55°C) Storage temperature: -40° to 167°F (-40° to 75°C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: • Certified for operation: 0 to 2000 m (0 to 6500 ft) • Designed and tested for operation -60 to 3000 m (-200 to 10000 ft)
Regulatory compliance	Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMI and safety standards: • UL 60950 • CSA C22.2 No. 60950 • EN 60950 • IEC 60950 • CE marking • AS/NZS 60950 • FCC Part 15 (CFR 47) Class A • VCCI Class A • EN55022 Class A • EN55024 • CISPR 22 Class A • AS/NZS CISPR 22 Class A • ETS 300 386
Network management	EHERLIKE-MIB (RFC 1643) IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-EXTENSIONS-MIB CISCO-VLAN-BRIDGE-MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB
Power requirements	WS-X6708-10G-3C: 444.36W (10.58A @ 42v) WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V) Go to /go/powercalculator for easy power consumption calculation
Indicators	Status: green (operational); red (faulty); orange (module booting) Link: green (port enabled and connected); orange (port disabled); off (port enabled and not connected)