2016 new product 2" PVDF venturi injector Ozone generator venturi tube
USD $1 - $70 /Piece
Min.Order:2 Pieces
Shenzhen Ozonegreenplant Technology Co., Ltd.
2016 new product 2" PVDF venturi injector Ozone generator venturi tube
Introduction:
Venturi is designed to be used with an ozone generator for water treatment.
It is made of anti-ozone material, PVDF.
Connected to your existing filtration system it allows an ozone injection point, where the vacuum effectively sucking the ozone gases into the water flow.
1.Technical parameter:
Out diameter of water inlet&outlet: 3/4
Out diameter of air inlet&outlet: 1/4
The check valve: be included in the air entry.
The requirement of the water: the temperature 0°C-60°C; PH for 5-11
2. Description of products:
1). The injector is composed by pressure inlet, suction chamber, and nozzle; it is a gas water mixed mode according to the jet negative pressure principle (wen QiuLi principle).
2). High-speed flow produces negative pressure in mixing tube's throat, which causes vacuum condition in inhaled indoor.
3). The intake tube gas is inhaled in the mixing tube automatically through the suction tube under the function of the pressure difference.
4). Water flow is mixed stired violently, the gas is shattered into tiny bubbles and becomes a mist of gas water emulsion, it spreads out of the mouth of the mixing tube. The gas continues to produce an eddy current mixing effection in the next tube, which makes the gas dissolves into water fully.
3. Features:
1). The gas water mixing tube (injector) with low flow and small volume was specially designed for small water treatment products.
2). The unique mixed air chamber design and the strong mixed injection of water and air make the mixing well-distributed, complete, and make the bubbles exquisite, mixed with high efficiency, low energy consumption and long service life.
4. Advantage:
1). Compact structure, simple maintenance, fast installation, reliable operation, be ready to start or stop at any time and automatic operation.
2). Durable PVDF construction
3). Check valve included in injection port
5 Notices:
1). The water temperature must be 0°C~60°C;
2). The water PH value should be 5~11;
3). The mixed liquids is not flammable liquids, the length of zonal impurities is not longer than 25 cm, the diameter of granule impurities is less than 4 mm in water.
6. Scope of application:
1). Small ozone generator support equipments.
2). All kinds of small water treatment gas-water mixing loop.
Specifications | |||
|
|
| |
|
|
|
We specialize in providing products with high quality. Our company pays more attention to the quality of the product than the price.
The product above is available in our company. If you are interested in our products or more our products, please feel free to contact us.