Specifications

ozone water mixing pump,pump, water pump 
1.ozone generator 
2.high concentration water mixing pump 
3.ozone generator parts

           ozone mixing parts, gas liquid mixing pump, water pump

Mixing system for ozone dissolved in water

1. Mixing system is simple and it intakes Ozone gas to the pump and mix Ozone with liquid in the pump, while conventional system needs additional equipment like "ejector" and "static mixer" to make ozone water.

2. Ozone dissolution ratio is more than 80~100% in case of out mixing system which is extremely high compared with conventional system. This dissolution ratio varies depending on water temperature, gas concentration, PH concentration etc.

3. CH Mixng pump is most suitable to pressurize the air and liquid, and let the air dissolved into the liquid, compared with any other type of pumps and apparatus like atatic mixer.

4. CH system does not use compressor, pressure dissolve tank, ejector and static mixer, which makes our system small in size and competitive in price. In case of conventional centrifugal pump method, the pump suck the liquid and air, and mix them and transport them.

Working condition:

PH: 3~9

Liquid temperature:-150C--1200C

Highest environment temperature: 400C

Speicefication:

Working condition:

* GO and GOL designed for clear and low viscosity liquid, or liquid containing extra-fine foreign matters.

* GOB and GOLB design for clear and low viscosity liquid, or explosive flammable liquid which containing very little solids.

* Liquid temperature: -150C ~ 1200C

* Maximum ambient temperature: +400C

* Gas-liquid ratio 1:9 (Gas suction volume 8~10%)

* Inlet: horizontal, Outlet: Vertical.