ST007 factory price Optical power meter with VFL-10mw with cable tracker can check line sequence
USD $60 - $70 /Unit
Min.Order:1 Unit
Shandong Senter Electronic Co., Ltd.
ST007 Optical power meter + VFL + Cable tracker + Check line sequence function in one tester/ Optical power meter with VFL with cable tracker
Brief Introduction
ST007 Fiber & Copper Cable Tester is one test meter together with the function of optical power meter, visual fault locator, cable tracking, check line sequence, and can be widely used in area of communication lines,computer network project and others, improving the line working progress and find out the line fault quickly.
It designed easy to carry and use; stable performance makes it suitable for a variety of environment, finding out the fault of kinds cables and fibers. It can save user’s time, improve the efficiency, handheld design with large LCD.
Main functions and key features
Technical Specifications
General specifications | |
Auto shut off | 10 minutes |
Auto close backlight | 10 seconds |
Working temperature | 0℃ ~ +40℃ |
Storage temperature | -10℃ ~ +40℃ |
Weight (g) | 220 |
Dimension (mm) | 160*76*28mm |
Battery | 3.7V/620mAh rechargeable Li battery |
Relative humidity | 20%~75%(Non-condensation) |
Optical power meter module | |
Wavelength range (nm) | 800~1700 |
Detector type | InGaAs |
Measurement range (dBm) | -50~+26, -70~+10 |
Uncertainty | ±5% |
Resolution | 0.01 dBm |
Adapters | FC, ST, SC |
Visual fault locator module | |
VFL | FP-LD |
Wavelength | 650nm±20nm |
Output power | 1mw/3mw/10mw/20mw (optional) |
Connector | 2.5mm universal adapter(SC, FC, ST) |
Working mode | CW or 2Hz modulation |
Applicable fiber | SM / MM |
Check line sequence module | |
Function | Support generate network line signal to view the network check line sequence with the receiver. |
Feature | Easy to operate: determine the line sequence by receiving side lights order |
Cable tracking module | |
Test cable type | Network cable, twisted pair cable, telephone line, USB cable, coaxial cable. |
Line status test | Determine open or short circuit |
Voltage polarity detection | Positive and negative of DC voltage |
Distance of signal transmission | No less than 3km |
DC Voltage | No more than 48V |