hand-held  fiber optical Inspection Microscope 200X SENTER 

Detailed Product Description:

The Mini Fiber Microscopes are used for inspecting fiber terminations in the field. With their good optical performance and integrated laser safety filters, they provide the most critical view of fiber end faces. This renders scratches highly visible and is the clear choice for field termination in sensitive installations

Setup:

The Mini Fiber Microscope comes fully assembled and requires only a few steps before it is ready to use .
1.Begin by removing the instrument from its case.
2. You'll need to insert 3X1.5V button batteries .Unscrew and remove the "Battery Cap".Insert the batteries with the "-"side up towards the Battery Plug;"+" side down towards the Light Switch.Replace the Battery Cap and tighten.
3. If you have purchased the Fiber Microscope with a Universal Adapter,it should already be in place and your instrument is ready to use.if you purchased an adapter separately,simply screw it into the threaded hole at the opposite end from the light Switch .Your instrument is ready to use.