BGTWSY Type wafer butterfly valve
USD $100 - $1,000 /Set
Min.Order:1 Set
Tianjin Bell Automatic Instrument Technology Co., Ltd.
BGTWSY Type wafer butterfly valve
Summary
Three eccentric metal seal butterfly valve is a newly developed high-performance metal sealing butterfly valve, mainly used in petroleum, chemical, power generation, metallurgy and urban heating system piping.
Model: BGTWSY is composed of three eccentric metal seal butterfly valve with BGT pneumatic actuator
BAWWSY is composed of three eccentric metal seal butterfly valve with BAW pneumatic actuator.
Three eccentric metal seal butterfly valve and on-off type actuator comprise switch off type butterfly valve.
Parameter
DN | 100~600 | mm | |||
PN | 1.0 | 1.6 | 2.5 | MPa | |
Testing Pressure | Seal | 1.1 | 1.76 | 2.75 | |
Shel | 1.5 | 2.4 | 3.75 | ||
Temperature | -25~+350 | °C | |||
Medium | Gas, water, steam, gas and all kinds of acid, alkali, salt and other weak corrosive media | ||||
Leak | Zero leakage by test in GB JBT8527-97 "metal sealing butterfly valve" |
Features:
Small size, light weight, opens and closes quickly.
Advanced composite cone miter three eccentric metal structure can achieve zero leakage.
Small open torque, no friction rotate and long life service.
Replace the body material and composite sandwich seal could make the valve fit for different media.
Tapered wedge reasonably designed to ensure uniform contact with the sealing surface.
Product Standard:
1.manufacturing and technical tests are met JB/T8527-97 "metal sealing butterfly" standard.
2.the length of the structure is accordance with the short series double flange connection structure in GB12221-89 "flanged metal valve structure length"
3.the side flanges conform "Steel pipe flanges national standards" requirement in GBB9115.6 ~ 10-88 PN0.25MPa, PN0.6MPa, PN1.0MPa, PN1.6MPa, PN2.5MPa
Features:
Conventional high-performance butterfly valve is a double eccentric design, like figure 1 and 2( drive shaft deviates from the center line of flange and the center line of sealing surfaces, and bevel Miter three eccentric butterfly valve adds a unique eccentric on a basis of double eccentric, like the figure 3), in order to achieve no friction of sealing at the open and close, and sequentially extend the life of the valve.
Make interference sealing contact between the seal to seal, thus effectively overcome the conventional metal valve operating torque short life
Main Parts Material
Valve | Valve Plate | shaft | Justice ring | Shaft sleeve | Packing |
Q235-A 0Cr19Ni9 0Cr19Ni12Mo2Ti | Q235-A 0Cr19Ni9 0Cr19Ni12Mo2Ti | 1Cr17Ni2 | Stainless steel and a variety of complex | SJ-1 ZCuZn38Mn2pb2 | Graphite |
BAWWSY Pneumatic three eccentric metal seal butterfly valve (with pneumatic actuator BAW) Dimensions
BGTWSY Pneumatic three eccentric metal seal butterfly valve (with BGT pneumatic actuators)
Refer to this chart
Application
Our main products