Specifications

1:TurkeyTundish refractory slide nozzle
2:Alumina quality.
3:High refractoriness.
4:Timely delivery.

Iran Tundish refractory nozzle (LQTN)

 

 

 

Linquan manufactures a wide range of slide gate plate refractories for various international systems.A range of High Alumina fired, Alumina Spinnel fired, Alumina Carbon fired Inner and Outer Nozzles are manufactured as per the requirements of the slide gate system.

 

 

 

1. Tundish Nozzle

 

Chemical and Physical Properties	LQTN- AlC75	LQTN- AlC80	LQTN- Al75	LQTN- Zr96	LQTN- Zr65
Al2O3    ≥ %	75	80	94	-85	-
ZrO2    ≥     %	-	-	-	(Insert)  92-96	65
C    ≥   %	4	4	-	-	-
Apparent porosity  ≤	8	7	15	9	20
Bulk density  g/cm3   ≥	2.90	2.95	2.95	3.05	3.5
Compressive strength (MPa) ≥	60	60	120	80	-
High temperature bending strength (MPa) (1400*0.5h) MPa ; ≥	6	7	15	20	-

 

 

 

2. Preassembled slide plate and lower nozzles

 

 

 

Chemical and Physical Properties	LQPSPL-80	LQPSPL-90	LQPSPL-Mg90	LQPSPL-94	LQPSPL-55	LQPSPL-Zr
Al2O3    ≥ %	80	90	-	94	55	80
MgO   ≥  %	12	-	90	-	8	ZrO2≥3
C     ≥  %	-	-	-	-	8	3
Apparent porosity ≤%	15	15	16	18	10	9
Bulk density g/cm3  ≥%	3.0	3.1	2.9	3.0	2.9	3.1
Compressive strength (MPa)	80	100	100	85	-	-

 

 

 

 

 

*Zirconia insert

 

Chemical and Physical Properties	LQZr60	LQZr70	LQZr80	LQZr85	LQZr95
ZrO2    ≥     %	60	70	80	90	95
Apparent porosity  ≤	21	20	18	15	6
Bulk density  g/cm3   ≥	3.70	3.90	4.0	4.35	5.2
Refractories  ≥  C	1800	1800	1850	1900	1900

 

 

 

Jinan Linquan provide a very wide range of Tundish Nozzles used for controlling the flow of steel from the Tundish to the Continuous Casting equipment including:
*Zirconia/ Zircon Nozzles – Manufactured in 65% to 95% Zirconia.
*Isostatically Pressed Nozzles – made in Alumina Carbon quality for medium and small steel plants.

 

 

 

1) Serivice life depends on steel-making condition, refractory slide gate and different operation mode.

 

2) For composited slide plate, we can mark different material in different part and detailed index according to the drawings.

 

3) Delivery time depends on the drawings. If new moulds are needed, an additive period may be necessary. In general it is 35-50 days.

 

 

 

 

 

Jinan Linquan Industry and Trade Co., Ltd
Linquan Trade, Serve World